Jatheon PnC 100 Installation & Administrators Manual - Rack Mounting
of
52
Plug n Comply Installation Guide
14
Rack Mounting
Installing the Outer Rack Rails
Outer rails attach to the server rack and hold the server in place. The outer rails
for the appliance chassis extend between 30 inches and 33 inches.
Begin by measuring the distance from the front rail to the rear rail of the
1.
rack
Attach a short bracket to the front side of the right outer rail and a long
2.
bracket to the rear side of the right outer rail.
Adjust both the short and long brackets to the proper distance so that the
3.
rail can fit snugly into the rack.
Secure the short bracket to the front side of the outer rail with two M4
4.
screws and the long bracket to the rear side of the outer rail with three M4
screws.
Repeat these steps for the left outer rail.
5.