1. DL manuals
  2. Jaton
  3. Wireless Access Point
  4. AM4200T
  5. User Manual

Jaton AM4200T User Manual

Summary of AM4200T

  • Page 1

    Am4200t outdoor cpe user manual v1.0 jaton technology limited. C onfidential this document and the information contained in it is confidential information of jaton technology limited (jaton), and shall not be used, or publish, or disclosed, or disseminated outside of jaton in whole or in part withou...

  • Page 2: Getting to Know Your Device

    Getting to know your device packing list upon receiving the product, please unpack the product package carefully. Each product is shipped with the following items: cpe products quantity odu unit 1 router unit 1 mounting brackets 1 48v dc power adapter 1 ethernet cable 1 if you find any of the items ...

  • Page 3

    Www.Jatontec.Com type led function description odu pwr power indicator green color – device is powered on run system run indicator fast blinking – device is rebooting slow blinking – device is in normal operation lan lan port status solid green – lan port is up blinking green – lan data activity in ...

  • Page 4

    To obtain the best radio signal level and connection quality, the user can rotate the cpe slowly in horizon direction to find the best signal direction, then fixed it with the anchor ear. The cpe radio signal strength level can be observed from the rf leds mounted on the lower panel as shown below. ...

  • Page 5: Connecting To Your Device

    Www.Jatontec.Com header connection: grounding make sure that the installation of the outdoor unit, antenna and cables is performed in accordance with all relevant national and local building and safety codes. Even where grounding is not mandatory according to applicable regulation and national codes...

  • Page 6

    Launch a web browser and specify http://172.16.1.1 in the address bar. A window will pop up requesting password. Input the user login pa ssword and then click the “log in” button. After successful log on, the default home page of the web gui interface will appear. Note that the default user password...

  • Page 7

    Www.Jatontec.Com maintenance firmware upgrade over http: click on the browser button to select the firmware file to be uploaded to the device. Click the upgrade button to begin the upgrade process. Upgrade must not be interrupted. Load factory defaults: this will restore the device to original facto...

  • Page 8

    Faq and troubleshooting problem suggested solution my pc cannot connect to the cpe. • re-plug the pc ethernet cable and check if the pc lan connection is up or showing activity. • check if the system run led is on. If it is not, check the power cord and make sure it is connected properly. Also verif...