Projection products javes slc-515sa digital lcos projector user manual china projectors group room 207, 2/f., block b, seaview estate, watson road, north point, hong kong. Telephone: (852) 28875151 fax: (852) 25031144 e-mail: jng@chinaprojectors.Com website: http://www.Chinaprojectors.Com.
2 warning statement all contents subject to change without prior notice warning this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interferen...
3 important safety instructions ---------------------------------------------------------------------------------------------------------- 4 introduction ----------------------------------------------------------------------------------------------------------------------------------------- 5 p roje...
4 important safety instructions operate the unit on 200 – 240 v ac, 50/60 hz or 100 – 240 v ac, 50/60 hz to dc 15v 7a power adaptor should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further. Unplug the unit from th...
5 introduction projector features the projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features: quick cooling function for reducing projector cooling time compact and portable u...
6 shipping contents the projector is shipped with the cables required for connection to a pc and video output devices. Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. The supplied accessories will be su...
7 projector exterior view front / upper side 1. External control panel (see "external control panel" on page 9 for detailed information.) 2. Ventilation grill 3. Lens cap 4. Focus adjuster 5. Front ir remote sensor left side view refer to "connection" on page 18 for more information on making connec...
8 right side view 13. 5w mono speaker 14. Lamp cover lower side 15. Lamp cover 16. Ceiling mount and adjustable feet 13 14 16 17.
9 controls and functions external control panel 1. Focus adjuster, lens focus can be adjusted by this key. 2. Power (refer to "start up" on page 25 and "shutdown" on page 30 for more information.) turns the projector on or off. 3. Right key. (osd control only) 4. Down key. (osd control only) 5. Volu...
10 remote control power - turns the projector on or off. Source - sequentially selects the input signal video, s-video, component video, or rgb. Mute – audio mute on or off display – display the video standard and mode up – up key for osd control left – left key for osd control right – right key for...
11 remote control effective range infra-red (ir) remote control sensors are located on the front and the back of the projector. The remote control must be held at an angle within 30 degrees of the projector’s ir remote control sensors to function correctly. The distance between the remote control an...
12 positioning your projector choosing a location your projector is designed to be installed in one of four possible installation locations: 1. Floor in front of screen; 2. Ceiling in front of screen; 3. Floor at rear of screen; 4. Ceiling at rear of screen. Your room layout or personal preference w...
13 iv. Ceiling rear select this location with the projector suspended upside-down from the ceiling behind the screen. Note that a special rear projection screen and the thomson projector ceiling mounting kit are required for this installation location..
14 connection when connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the pr...
15 methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the video source device as described below: best video quality the best available video connection method is compo...
16 operation start up 1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). Check that the power indicator on our projector adapter lights orange after power has been applied. 2. Plug the dc plug into projector’s 15vdc socket. Remove the len...
17 shutdown 1. Press power to turn the projector off. 2. The power indicator light flashes green and the lamp shuts down, the fans continue to run for approximately 45 seconds to cool down the projector. To protect the lamp, the projector will not respond to any commands during the cooling process. ...
18 menu operation menu system osd menu1 video s-vide ycbcr/ypbpr pc dynamic static theater game front/up front/down rear/up rear/down osd menu 2 0 to 100 brightness (default 50) 0 to 100 contrast (default 50).
19 0 to 100 color (default 50) osd menu 3 0 to 100 hue (default 50) english french german spanish portuguese italian system default.
20 picture menus some picture adjustments are available only when certain input sources are in use. Function (default setting / value) description source input 1. Video input: rca composite video 2. S-video input: mini din5 s-video 3. Ycbcr/ypbpr input: 3 rca component video 4. Pc input: vga/svga co...
21 contrast adjusts the degree of difference between dark and light in the image. The higher the value, the greater the contrast. Use this to set the peak white level after you have previously adjusted the brightness setting to suit your selected input and viewing environment. Color increases or dec...
22 safety instructions for ceiling mounting of your javes projector we want you to have a pleasant experience using your javes projector, so we need to bring this safety matter to your attention to prevent damage to person and property. If you intend to mount your projector on the ceiling, we strong...
23 trouble shooting the projector does not turn on. Cause remedy there is no power from the power cable. Plug the power cord into the ac inlet on the projector, and plug the power cord into the power outlet. If the power outlet has a switch, make sure that it is switched on. Attempting to turn the p...
24 maintenance care of the projector your projector needs little maintenance. The only thing you need to do on a regular basis is to keep the lens clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens clean the lens whene...
25 specifications projector specifications * all specifications are subject to change without notice. Display technology single liquid crystal on silicon (lcos) display resolution 800 x 600 x rgb contrast ratio 600:1 (full on/full off) lamp type and life 50w hid, 3000 hours std maximum resolution vi...
26 dimensions unit: mm 240 200 90
27 warranty limited warranty javes warrants this product against any defects in material and workmanship, under normal usage and storage. Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, javes’s only oblig...