Jay Care Back Owner's Manual

Summary of Care Back

  • Page 1

    S e c t i o n o w n e r ’s m a n u a l ja care ac important cons mer in ormation e: his manual contains important instructions that must e passed on to the user o this product. Lease do not remove this manual e ore delivery to the end user. U er: his manual must e iven to the user o this product. U ...

  • Page 2

    Xt3505 rev. J 2 e n g l i s h jay care back jay care back - 3500 series models the jay care back is designed to accommodate and support the kyphotic spine and provide a high degree of comfort and stability. It is designed to help increase sitting tolerance and function. Its unique foam construction ...

  • Page 3

    D) to adjust the height of the bracket, loosen screw “a” until the bracket slides freely on the back post. Once the proper height of the back is determined, tighten the screw. All future adjustments of the back height are done with screw “a”. E) always turn the quick release quarter turn bracket to ...

  • Page 4

    Xt3505 rev. J 4 e n g l i s h jay care back fitting the jay care back to the user tighten all fasteners to 20 in.-lbs. (2.3 n-m) using a phillips no. 2 screwdriver. Fitting the back height 1. When the back is properly adjusted, the top hooks should rest comfortably against the wheelchair back posts....

  • Page 5

    Xt3505 rev. J 5 e n g l i s h jay care back easy cleaning and re-assembly for jay care back to clean back cover pull foam insert away from back shell. Unzip, remove foam and turn cover inside out, zip closed to avoid snagging. If applicable, note where lumbar shims are placed to ensure proper re-ass...