Jay-tech 799 User Manual - 2.7 Network Connection

2.7 Network Connection 

Wireless Network 

1.  Select "settings" icon under the shortcut bar of the desktop. 

2.  Select "wireless network" in the Settings menu . 

3.  Select check box behind Wi-Fi to Enable Wi-Fi. 

4.  Select "Wi-Fi setting" option to set Wi-Fi network. 

5.  All the AP devices can be found will be listed. Click the AP to be 

connected in the options. 

6.  If the AP was successfully connected before, the information will 

be stored. Select "connection" in the window popping up to start 

connection, while select "forget" to eliminate AP information. 

7.  If the AP is not encrypted, select "connection" in the window 

popping up to start the connection.   

8.  If the AP is encrypted, input password in the window popping up 

and click "connection" to start connection. 

9.  When the network is successfully connected, Wi-Fi icon will 

appear on the status bar on the top of the desktop. 

3. Input Operations 

3.1 Keyboard 

When you use procedures or files that need to input text or numbers, 

the touch keyboard will automatically appear on the screen. 

NOTE

 This device supports external USB keyboard, but when using 

an external USB keyboard, some keys may not be normally used. 

3.2 Touch Screen 

Touch screen can induct moving track of fingers, which can carry out 

the following operation: 

Click: Select an icon and click it to select the icon or option needed 

Long Press: Select an icon and long press it to select the icon and it 

can be dragged to the quick bar at the bottom of the desktop to 

display . 

Drag: Drag icons on the desktop to move them among different 

7