Jay-tech 832 User Manual - Dtv Mode
20
The unit contains different setting menus. Once the initial programming is entered, it will
be remained in the memory until it is changed, and the unit can always be operated
under the same conditions.
This setting will be remained in the memory until the settings are changed even after
setting the player to standby mode.
Common procedure for initial settings
-
Press MENU button on unit side or remote control to display the main menu.
-
Press LEFT or RIGHT navigation button to select different menus.
-
Press OK button to enter a menu and press UP or DOWN navigation button to select
preferred option.
-
Press OK button to enter adjusting menu page.
-
Press LEFT or RIGHT navigation button to adjust the value.
-
Press MENU button to save current setting and return to previous menu page.
-
Press EXIT button to exit menu page.
DTV MODE
Press SOURCE button on unit side or remote control to set the unit in DTV mode.
First Time Installation
If first time using, below menu page will appear on the screen after turning this unit on:
OSD Language
Press LEFT or RIGHT navigation button to select preferred On-Screen-Display language.
Country
Press LEFT or RIGHT navigation button to select the country that you are living in.
Tune Type
Press LEFT or RIGHT navigation button to select preferred tune type.