Jaycar Electronics AR1840 User Manual - Transmitter
3. Setup Guide
To enjoy a life of wireless video and audio, just connect the
transmitter to any A/ V source you like and connect the
receiver to a TV, monitor or speaker in another location.
NOTE: Make sure the ON/OFF switch is in the 「OFF」position before connection
1. Connect one end of the RCA
cable (or scart cable) to the
audio and video jacks, and
connect the other end to a
source device via its “AV
output”.
2. Connect the DC plug of the
adapter to the DC jack, and
connect the power supply to
an outlet.
3. Fix IR mouse next to or in
front of IR sensor of source
device, or alternatively
have transmitter facing
directly toward the source
device.
Transmitter
Receiver
1. Connect one end of the RCA
cable (or scart cable) to the
audio and video jacks and
connect the other end to a
TV (or monitor, speakers)
via its“AV input”.
2. Connect the DC plug of the
adapter to the DC jack, and
connect the power supply
to an outlet.
3. Keep the IR window
oriented toward front
when using your source
device remote controller.
4
Power
Supply
IR Mouse
AV Equipment
RCA Cable
(Or Scart Cable)
Remote
Controller
To TV
Power
Supply
RCA Cable
(Or Scart Cable)