Jaycar Electronics MS6174 User Manual - Making The Connections
Making the connections
1.
First connect the mini USB of MS6174 to the MS6170/ 6172.
2.
Then connect the single USB of MS6174 to the PC.
3.
Should be connected to meter before it is connected to PC.
Please follow below steps to connect your MS6174, MS6170/ 6172
and PC.
Step 1 - Connect MS6174 to a meter in operation
Connect only the mini USB to the meter.
MS6174
can be used to work with meter which either being in use or be
not in use. In case meter being in use, only connect the data cable between
MS6174 and meter as following diagram.
Step 2 - Connect MS6174 to PC
MS6174 is connected to PC.
By executing driver installer under folder “
CP210x Drivers X.X.X for Win7_8_8.1_10”.
Where X.X.X is driver
version. There are installer inside this folder for x64(64-bit) and
x86(32-bit). Please run installer match number of bit of your Windows OS.