Jazz Speakers J-9941B Operating Instructions Manual - page 3
Product Specifications
1. Subwoofer
:
Output Power (R.M.S.) : 50 W
Driver : 8" Woofer
Load Impedance : 4 Ohms
Fuse: AC 250V/1A (Local voltage: 220 ~ 240V)
AC 125V/1.5A (Local voltage: 100 ~ 120V)
Magnetically Shield :
2. Satellite
:
Output Power (R.M.S.) : 10W x 5
Driver : Front & Rear SPK. (Plastic) 3" full range
Center SPK. (Plastic) 3" full range + 1.5" dome tweeter
Load Impedance : 4 Ohms
Magnetically Shield : YES
3. Total Power (R.M.S.) : 100 W
4. Frequency Response : 40 Hz ~ 20 kHz
5. Dimension (W x H x D) : Subwoofer - 280 x 420 x 350 mm
Center - 330 x 95 x 200 mm
Front & Rear - 100 x 150 x 150 mm
6. Center Speaker (With build in Decoder) :
POWER Adapter : Power source from DC adapter
Operation Environment : 0
~ 40
7. Remote control :
Battery : (DC 1.5V AAA x 2)
Dimension (W x H x D) : W 60 x H 15 x D 160 mm
(Wooden)
(Plastic)
Not necessary
3
4
Remote Control Functions
12. POWER
17. VOLUME (+/-)
3. 5.1 CH
2. Pro Logic
1. Stereo
13. Mute
5. Line
4. Optical
14. Coaxical
7. C_delay
6. S_delay
15. Dynamic
9. SPCFG
8. Mode
16. Status
11. Test
10. Trim
18.
Theater
Hall
Stadium
1. Stereo : Manual selection of stereo 2-channel audio mode.
2. Pro Logic : Manual selection of Dolby Pro Logic audio mode.
3. 5.1 Ch : Manual selection of Dolby Digital or DTS audio mode.
4. Optical : Manual selection of optical input mode.
5. Line : Manual selection of line input mode.
6. S_Delay : Surround speaker's audio delay when in the Dolby Digital or Dolby Pro
Logic audio modes. Choices are: 0 ms, 5 ms, 10 ms, 15 ms (default: 0 ms).
7. C_Delay : Center speaker audio delay when in the Dolby Digital or Dolby Pro
Logic audio modes. 0-5 ms delay (default : 0 ms)
8. Mode : Selection of audio type. Choices are DTS(*), Dolby Digital, Dolby Pro Logic,
or Stereo
9. SPCFG : For Dolby Digital and Dolby Pro Logic audio modes only. Distributes
low-bass frequencies, usually reproduced by the subwoofer, to the front, center
and surround speakers. Press the SPCFG button and adjust the levels using the
Volume +/- buttons.
10. Trim : Same as "Test" but uses your audio input signal rather than a test signal.
Adjust each speaker's volume level using the Volume +/- buttons.
11. Test : Auto test individual speaker volume adjustment when in Dolby Digital or
Dolby Pro Logic modes. Press and hold the test button for 2 seconds. As the test
signal travels from channel-to-channel, adjust each speakers volume level using
the Volume +/- buttons.
12. Power : Turns system suand-by power on/off.
13. Mute : Mutes/Restores systems volume.
14. Coaxial : Manual selection of coaxial input mode.
15. Dynamic : Dynamic range adjustment between the loudest and softest sounds
being reproduced. Choices are: 0%, 25%, 50%, 75% (default: 0%).
16. Status : Displays audio mode status.
17. Volume (+/-) : Raises or lowers the systems volume level.
18. Theater /Hall /Stadium : Used in only the Stereo audio mode, selecting Theater,
Hall, or Stadium modes creates various levels of simulated surround sound
effectsfrom a 2-channel stereo audio source.
Package Contents
* Center Speaker with built-in AC-3 Decoder Box , Subwoofer, Satellite speakers x 4
* Power Adapter
* Coaxial Cable
* 3.5 mm to RCA stereo signal cable x 1
* RCA to RCA signal cable(3M) x 1
* RCA Extension cable(3M) x 4
* 9 pin DIN cable x 1
* Wall Mounting kit
* Remote control
* Battery (DC 1.5V AAA x 2)
* User Manual
Optional Accessories
* F-500(A) Speaker stand
Telescopic floor stand for rear speaker (Cast metal base)