Jbc AD 8211 Reference Manual - English
3 - METAL BRUSH
Ref. 0006217
4 - TIP TINNER / CLEANER
Ref. 9900000
2. Pull the tip out and let it dry.
3. Clean the grade with a wet sponge.
1. Introduce the soldering tip in the
paste.
A long proven method of chemically
cleaning and retinning at the same time.
It should be used when the above
methods fail and a very active cleaning
method is needed.
The metal brush differs from the cleaning
wool in that it is a little bit more agressive
on the tip. It therefore cleans the tip very
well but it should be used gently.
5 - SAND CLEANING ACCESSORY
Ref. 0006780
JBC's sand cleaning method reconditions
even the most oxidised tips and makes
them wettable again. This method is
advisable when all else fails.
Sand bottle (30 c.c.)
ref.: 0006211
Deposit
2. Pull the tip out.
1. Enter the soldering tip inside
the sand and turn it around.
F i l l i n t h e d e p o s i t
with sand and place
it inside the stand.
(see position).
4