Jbc ap130-a Manual - page 4
of
8
2. Inserting
3. Aligning
4. Fixing
4
Align the tip of the cartridge with the feeding
tube. Use a plier for a safe tip alignment.
Changing cartridge
For a safe cartridge change, unplug the tool or turn the station off before following these guidelines:
Loosen the screw and remove the cartridge.
Use a plier to remove it if still hot.
1. Removing
Alignment
Important:Tighten the screw again. This is
necessary for the tool to function.
Important:Insert the cartridge as far as
the mark for a correct connection.
Mark