Solder feed iron ref. Ap250-a www.Jbctools.Com.
Packing list the following items should be included: solder feed iron ....................................... 1 unit ref. Ap250-a Ø1 mm feeder nozzle (ref. 0019212) is included manual ............................ 1 unit ref. 0017297 Ø1.5 mm feeder nozzle ......................... 1 unit ref. 0019211...
Features solder feed iron ref. Ap250-a solder feed stand ref. Ap-sd control unit the ap250-a solder feed iron is fully compatible with any jbc station within the modular line and with the cf solder feed station within the compact line. Www.Jbctools.Com 3.
Align the tip of the cartridge with the feeder nozzle. Use a pliers for a correct tip alignment. Changing cartridge for a safe cartridge change, unplug the tool or turn the station off before following these guidelines: loosen the screw and remove the cartridge. Use a flat pliers to remove it if sti...
Pull out the remaining solder from inside the feeder nozzle. Use a pliers if necessary. Note: use 0.8 - 1.0 mm diameter solder wire. Use 1.0 - 1.5 mm diameter solder wire with the 0019211 feeder nozzle. Insert the solder wire while pushing the trigger repeatedly until the solder wire appears at the ...
Changing the feeder nozzle feeder nozzle 1. Take out the screw from behind to remove the reel and the solder wire from the nozzle. Next, remove the two screws from the other side and lift the cover off. Make sure the tool is unplugged. 2. Take out the nozzle and replace it with the new one while hol...
Regulating the feeder nozzle depending on the component you are soldering or the cartridge being used, you can either shor- ten or lengthen the feeder nozzle by (a max) 10 mm. 1. Loosen the screw to change the length of the nozzle. 2. Adjust it to the required length and tighten the screw. Www.Jbcto...
ø 0,6 ø 0,8 3,2x1,5 ø 2,2 1,8x0,8 2,2x1 ø 1,7 2,2 x 1 1,2x0,7 2,2x1 4,8x1,5 the ap250-a solder feed iron works with c250 cartridge range. Find the model that best suits your soldering needs in www.Jbctools.Com compatible cartridges c250-401 c250-402 c250-403 c250-418 c250-410 c250-405 c250-406 c250-...
For production line work, we recommend using our be-sa solder reel stand which can hold up to 2.5 kg of solder wire. Simply wrap the solder wire twice around the empty reel as shown. Solder reel stand accessories solder reel stand ref. Be-sa solder feed iron ref. Ap250-a the fume extractor is an eas...
Notes 10
Www.Jbctools.Com 11.
This product should not be thrown in the garbage. In accordance with the european directive 2002/96/ec, electronic equipment at the end of their life must be collected and returned to an authorized recycling facility. Manual in other languages available on our website warranty jbc’s 2 year warranty ...
