Www.Jbctools.Com reference guide cd soldering station.
Cd soldering station reference guide reference guide t210 t245 soldering handpieces cl6210 brass wool s0331 sponge 2 cd / soldering station contents control unit t210-a soldering iron c210001 c210008 cartridges c245003 c245007 cartridges manual power cord t245-a soldering iron manual supplied with c...
Tool suport adjustement cable collector 3.
4 sponge the smoothest cleaning method.The sponge has to be kept wet (not soaked) using distilled water. S0331 sponge s0354 sponge cl6210 brass wool very effective cleaning method. Leaves a small layer of solder on the tip so it prevents from oxidizing between cleaning and re- wetting . Depending on...
5 cl6205 inox wool a bit more agressive on the tip than the brass wool. Provides a deeper cleaning on the tip. Taping tap smoothly the cartridge on the wiper profile to remove the excess of solder wiping use the slots to wipe any posible particle sticked on the tip wiper optional tips cleaning cl622...
6 installation jbc stations intelligently manage the tool temperature: work mode: when the tool is used, pre-set work temperature is 350º c. Sleep mode: when the tool is in the stand, the temperature goes down to 180º c ( depending of the configuration). Hibernation mode: after longer periods of ina...
Settings 0 c selected temp. 350 o c p o w e r 1 0 % 350 decrease & move down increase & move up tip temperature % instant power supplied to the tool access menu & confirm selection working main menu counters tool settings exit 1 reset settings 2 station settings 3 tool settings 1 plugged hours 0 2 w...
Warranty jbc’s 2 years warranty guarantees this equipment against all ma- nufacturing defects, covering the replacement of defective parts and all necessary labour. Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage ...
