Jbc DIT-D Manual - page 5
Soft foam
Non-slip and soft touch
Blue grip to quickly distinguish
from other handles
ø 1
ø 1,5
ø 3,5
A
A
B
8
9
For general use
Work with C245 Cartridge range.
Compatible Handles
General Purpose Handle
Ref. T245-A
Blue General Purpose Handle
Ref. T245-PA
Non-slip Handle
Ref. T245-B
Soft Thermal Insulator Handle
Ref. T245-C
Note: All models are supplied with a 1.5m cable.
Changing cartridges
1. Removing
2. Inserting
3. Fixing
Place the handle in the
extractor and pull to
remove the cartridge.
Place the handle on top
of the new cartridge and
press down slightly.
Use the holes for fixing the
cartridge* as follows:
A. For straight C210.
B. For curved C210.
C. For curved C245.
D. For straight C245.
B
C
A
D
Compatible cartridges
The DIT-D works with T245/T470 handles and C245 cartridges or with T210 handles and C210
cartridges. Find the model that best suits your soldering needs in www.jbctools.com
Round
Chisel
Round
bent
Bevel
Special
models
Save time and change cartridges safely without switching the station off.
*
Important
It is essential to insert the cartridges as far as the mark for a proper connection.
Mark
www.jbctools.com