Summary of JTE-1B
Page 1
Www.Jbctools.Com hot air station ref. Jt-b www.Jbctools.Com.
Page 2
2 manual * these accessories not supplied with jt-2qb / jt-1qb / jt-9qb stations www.Jbctools.Com packing list heater hose set ref. Jt-t1a (100v - 120v) jt-t2a (230v) stand ref. Jt-sb control unit ref. Jte-1b jte-2b jte-9b extractor stand* ref. 0008752 suction tube* ref. 0932330 suction cups* ref. 0...
Page 3
3 power cord socket equipotencial connection pedal 0964551 (not included) (on / off hot air) usb-b connector: - update station software - create graphs - manage parameters via pc connectable tools: jt-t2a / jt-t1a heater hose set te-tb precision heater hose set heating element hot air switch (on / o...
Page 4
4 used to remove the jt nozzles adapted to jt-ta heating set. In case of misalignment of the nozzle with the jt-ta heater: 1. Bend down the nozzle tab with a screwdriver or flat nosed pliers. Ref. Shape size jn2020 straight Ø 8mm jn8417 straight Ø 10mm jn2015 bent Ø 4mm jn2012 bent Ø 6mm jn6633 bent...
Page 5
5 1 2 3 4 to desolder small components you must use the protector + tripod (fig. 1 and 2). For bigger components use the extractors (fig. 3 and 4). Protectors * ref. Axb (mm) * ref. Axb (mm) p3353 4,3 x 3 48 p2230 15 x 15 p3786 5,2 x 5,2 60 p4010 17 x 17 p3352 5,2 x 7,5 p4005 18 x 29 p3355 5,2 x 9,5...
Page 6
Temp º c temp º c air % º c time to stop 45 seconds profile 8 power 70% 400 380 80 400 º c select air 100% time 125s. 6 decrease & move down decrease profile number increase & move up increase profile number access menu (pess key 2 seconds) & confirm selection access menu (pess key 2 seconds) select...
Page 7
Main menu 1 reset settings 2 station settings 3 profile settings 4 counters 5 program version exit settings profile settings edit profile edit profile 8 1 temp unit celsius 2 maximum temp 450 0 c 3 minimum temp t off* 4 fix temp 400 0 c 5 max air 100% 6 min air 10% 7 fix air 40% 8 time to stop 120 s...
Page 8
8 1. Position suction cup. 2. Hot-air melts solder. 3. Ic pops up automatically. Edit profile this option allows you to edit or create a profile. First , you must select the profile to edit and then modify the points that make up the profile. Each profile is composed of 9 points, each point is forme...
Page 9
9 1. Ensure that the tool is off. 2.Use a wrench to unscrew the connecting nut. Only perform this operation when element is cold and unit is disconnected from mains. 1. Untighten screw. 2.Pull element forward off handpiece. 3. Connect new heating element, ensuring its seated all the way in. 4. Repla...
Page 10
10 maintenance before carrying out maintenance or storage, always allow the equipment to cool. - clean the station’s screen with a glass cleaner or a damp cloth. - use a damp cloth to clean the casing and the tool. Alcohol can only be used to clean the metal parts. - maintain heating element clean p...
Page 11
11 safety it is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - the power cord must be plugged into approved bases. Be sure that it is properly grounded...
Page 12: Www.Jbctools.Com
0014001-0614 www.Jbctools.Com - temperature selection: room temperature / 150ºc to 450°c (300ºf to 840ºf). Cool mode: t off, can be used to blow air at room temperature. - ambient operating temperature: 10 to 40ºc (50-104ºf) - output peak power: 1000w. - air flow regulation: 6-45 slmp. - vacuum: 30%...