- DL manuals
- Jbc
- Soldering Gun
- MVE-A
- Manual
Jbc MVE-A Manual
Summary of MVE-A
Page 1
Premium 4 tools rework station with pneumatic pump ref. Dmve-a www.Jbctools.Com.
Page 2
Packing list the following items should be included: stand cable ................ 2 units ref. 0011283 stand ................ 1 unit ref. Ad-sd sponge ............................. 1 unit ref. S0354 metal brush .................... 1 unit ref. Cl6217 pneumatic desoldering module .......................
Page 3
Manual ............................. 1 unit ref. 0016078 premium 4 tools rework station with pneumatic pump ref. Dmve-a suction filter ................. 1 unit ref. 0821830 cotton filter ................. 1 unit ref. 0781046 it contains 10 filters dr560 accessories ref. 0010211 internal gasket ........
Page 4
Features work simultaneously with up to 2 tools and join each station port with 1 module + 1 pedal (peripherals). Stand ref. Ad-sd general purpose handle ref. T245-a desoldering iron ref. Dr560-a cartridge ref. C245903 ref. C245906 tip ref. C560004 ref. C560005 ref. C560013 stand ref. Dr-sd stand ca...
Page 5
Pneumatic desoldering module ref. Mve-a to another peripheral to pedal ref. P-005 usb-a connector 3.5” color tft touch screen tilt the display for easy reading suction filter ref. 0821830 module cable ref. 0014874 speaker air pressure (4-6 bar) www.Jbctools.Com 5.
Page 6
Stand ref. Ad-sd quick tip changer permits switching cartridges without interrupting your work. Adjustable tool holder suits your work position. Adjustable cable collector adjustable stands stand ref. Dr-sd quick tip changer holding tip system for easy change. Cable collector keeps working area free...
Page 7
Improve thermal transfer by cleaning the tip after each solder joint. Tip cleaner optional brass wool ref. Cl6210 inox wool ref. Cl6205 brushes ref. Cl6220 tip-tinner ref. Tt-a sand ref. Cl6211 splashguard non-slip base sponge ref. S0354 wiper ref. Cl0236 very effective cleaning method. It leaves a ...
Page 8
ø 1 ø 1,5 ø 3,5 a a b t245 changing cartridges 1. Removing 2. Inserting 3. Fixing place the handle in the extractor and pull to remove the cartridge. Place the handle on top of the new cartridge and press down slightly. Use the holes for fixing the cartridge* as follows: a. For straight c210. B. For...
Page 9
A ø b ø dr560 changing tips this operation should be done while the tip is hot, not below 250°c, so that any tin left inside is in molten state. 250ºc minimum c560-001 c560-002 c560-003 c560-004 c560-009 c560-014 c560-001 Øa=1,4 Øb=0,6 Ømax. Pin=0,4 c560-002 Øa=1,8 Øb=0,8 Ømax. Pin=0,6 c560-003 Øa=2...
Page 10
Dr560 changing the heating element 1. Loosening the deposit lid needs to be loosened. 2. Removing loosen the screw as shown and remove the heating element. 3. Placing place the new heating element and follow the steps conversely. 2 1 3 to perform this operation, turn off the station or disconnect th...
Page 11
Dr560 tin deposit cleaning 1. Removing the lid 3. Inserting the deposit check filter lid check internal joint 2. Cleaning the filter and internal joint must be checked and replaced if dirty or damaged. Remove the coil to clean the inside of the deposit with the stick supplied. The lid must be remove...
Page 12
Desoldering process use a tip with a larger diameter than the pad to achieve maximum aspiration and thermal efficiency. Place the tip with the component terminal in the hole. After pressing the desoldering key there is a slight delay until the self-contained vacuum pump stops. This makes sure that t...
Page 13
Peripherals port 2-dr 17:14 pedal none module none module mve_a none 1. Select the module from the list of peripheral connections. Remember your first connection is denoted as “a”, the second being “b”, etc. (e.G. Mve_a, mve_b,...) 2. Press menu or back to save changes. Once set up, you can change t...
Page 14: 350
350 ºc port 3 power 45% selected 350º + c245-003 menu 17:14 ? Port 3 3. Hibernation operation the jbc exclusive heating system our revolutionary technology is able to recover tip temperature extremely quickly. It means the user can work at a lower temperature and improve the quality of soldering. Th...
Page 15: 350
350 ºc port 3 power 45% selected 350º + c245-003 menu 17:14 ? Menu 17:14 ? Port 1 port 2 t210 cartridge c210-001 350ºc dr560 cartridge c560-001 sleep tool in the stand / 180ºc work screen the dme-a offers an intuitive user interface which provides quick access to the station parameters. Station info...
Page 16
17:14 ? Station tools counters peripherals utilities info language reset registers total and partial hours for each port: work, sleep, hibernation... Multi-language up to 8 languages to choose from. Personalize the station: station name, pin activation, screen settings, robot activation, partial res...
Page 17: Tools
Usb flash drive is connected to the usb-a. Station is controlled by a pc. Station is controlled by a robot. The station is being updated by a usb flash drive. System notifications warning. Press here for description. Error. Press here for failure description, the type of error and how to proceed. In...
Page 18
By pressing graphics in the utilities menu, temperature and power figures in real time are displayed for each port. This helps you decide how to adjust your process or which tip to use to obtain the best quality soldering. Process analysis export graphics insert a usb flash drive into the usb-a conn...
Page 19
Soldering network remotely manage and monitor as many stations as your pc can handle. Functions: - set all the station parameters from your pc. - organize groups of stations and set all their parameters at the same time. - store specific configurations for later uses. - analyze the soldering graphic...
Page 20
1. Connect the dme to the pse power supply units via the ps connector (rj12). 2. Connect the other pse’s as follows: centralize control of 3 pse power supply units in a single dme and work with as many as 16 tools simultaneously. Increase x4 your dme’s possibilities four-tool control unit ref. Dme-a...
Page 21
1. Connect the tool to the station port by means of the chb-a converter. 2. Connect your robot system to the station’s robot connector (rj12). Db9-rj12 adapater available on request (ref: 0013772). 3. Enable the robot option in the station settings and the icon will appear: 4. Set your robot’s comma...
Page 22
- replace a blown fuse as follows: - replace any defective or damaged pieces. Use original jbc spare parts only. - repairs should only be performed by a jbc authorized technical service. Clean periodically maintenance before carrying out maintenance or storage, always allow the equipment to cool. - ...
Page 23
Safety it is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - the power cord must be plugged into approved bases. Be sure that it is properly grounded be...
Page 24
Specifications 4 tools rework station with pneumatic pump dmve-1a / dmve-2a / dmve-9a - total weight: 10.1 kg (22.3 lb) dme-1a 120v 50/60hz. Input fuse: 6a. Output: 23.5v dme-2a 230v 50/60hz. Input fuse: 3.15a. Output: 23.5v dme-9a 100v 50/60hz. Input fuse: 8a. Output: 23.5v - weight: 4.6 kg (10 lb)...
Page 25
Www.Jbctools.Com 25.
Page 26
Exploded view · despiece · explosionszeichnung 26.
Page 27
Www.Jbctools.Com 27.
Page 28
0016078-0316 warranty jbc’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage paid, t...