Jbc PSE-1A User Manual - page 7
www.jbctools.com
7
Working with Robots
Power
Supply Unit
Robot
Update the station software
1. Download the JBC Update File from
www.jbctools.com/manager.html
Converter
Ref. CHB-A
RS-232
connection
LAN Hub or USB HUB
2. Connect the LAN (Ethernet) or USB cable
to the station. The icon is diplayed in the
station or PC while updating.
1. Connect the tool to the station port by means of the CHB-A Converter.
2. Connect your Robot system to the Robot connector (RJ12) of the station.
DB9-RJ12 Adapater available only if necessary (Ref: 0013772).
3. Enable the Robot option in the station settings and the notification will be displayed:
4. Set your Robot’s commands according to the Robot Communication Protocol, available on the
website www.jbctools.com/jbcsoftware-menu-115.html
Manage and monitor the station using a Robotic system.