1. DL manuals
  2. JBJ Lighting
  3. Flood Light
  4. Varyscan 4 1200 HMI
  5. User Manual

JBJ Lighting Varyscan 4 1200 HMI User Manual

Manual is about: JBJ Lighting Varyscan 4 1200 HMI

Summary of Varyscan 4 1200 HMI

  • Page 1

    Jb-lighting lichtanlagentechnik gmbh sallersteigweg 15 d-89134 blaustein-wippingen telefon ++49(0)7304-9617-0 telefax ++49(0)7304-9617-99 http://www.Jb-lighting.De english bedienungsanleitung user manual.

  • Page 2: Varyscan

    2 varyscan ® 4 1200 hmi illustration of vs 4 1200hmi ..........................................................................................................................3 back view and position of operating sections .................................................................................

  • Page 3: Varyscan

    3 varyscan ® 4 1200 hmi illustration of vs 4 1200hmi.

  • Page 4: Varyscan

    4 varyscan ® 4 1200 hmi back view and position of operating sections occupation of dmx-sockets dmx-in dmx-out pin no. Signal colour of wire pin no. Signal colour of wire 1 ground black 1 ground black 2 dmx - white 2 dmx - white 3 dmx + red 3 dmx + red 4 free 4 not connected 5 +5v green/black 5 not c...

  • Page 5: Varyscan

    5 varyscan ® 4 1200 hmi put in/ exchange of the bulb warning : before opening pull out mains plug! Loosen the screws at the lid of your varyscan ® with a suitable screw-driver and lift the lid (label varyscan ® 4 1200 hmi). You can see the bulb holder in the back third of your varyscan ® (see outlin...

  • Page 6: Varyscan

    6 varyscan ® 4 1200 hmi ? Optional channels of varyscan ® ? Reset on dmx ? Dmx-address initialisation mode this mode serves for adjustment and basic initialisation of the varyscan ® (carrying-out by producer). Test mode to see the variety of functions of your varyscan ® easily, start the test mode b...

  • Page 7: Varyscan

    7 varyscan ® 4 1200 hmi channel 2 y-axis channel 3 gobo channel 4 colour channel 5 shutter/dimmer channel 6 iris channel 7 rotating gobos; positioning and rotation channel 8 effect wheel dip-switch position: dip-switch no.2 switch 2 and 3 off 2. 6 channel drive mode (clay paky - goldenscan 3 compati...

  • Page 8: Varyscan

    8 varyscan ® 4 1200 hmi adjustment of dmx-addresses : dip-switch no.1 switch 1 -9 depending on the optional drive mode, you have to adjust dmx-addresses as follows. The addressing works by a binary numeral system and in 6 channel drive mode it has to follow in six steps. Varyscan ® nr. Dmx address d...

  • Page 9: Varyscan

    9 varyscan ® 4 1200 hmi 2 9 3 17 4 25 varyscan ® nr. Dmx address dip switch setting 5 33 6 41 7 49 8 57 9 65 10 73 11 81 12 89 definition of dip-switch positions for defined dmx-addresses every single dip-switch responds to the above designated figures. If you would like to adjust a defined dmx- add...

  • Page 10: Varyscan

    10 varyscan ® 4 1200 hmi all remaining dip-switches sw9 sw8 sw7 sw5 sw2 stay in position "off". Changing of gobos open the lid with the label varyscan ® 4 1200 hmi, by screwing off the six screws. Now you are able to press the gobos at the gobo wheel out of their holder and then put in other gobos. ...

  • Page 11: Varyscan

    11 varyscan ® 4 1200 hmi b service instructions repair of defects defect reparation the appliance does not work at all (you can not hear any noise from the ventilator) exchange 16 ampere fuse of the appliance the bulb of the appliance does not shine, but electronics are working, i.E. Motors are work...

  • Page 12: Varyscan

    12 varyscan ® 4 1200 hmi part no. 1. Motor part no. 2. Tellerfedern part no. 3. Stahllaserteil part no. 4. Kunststoffscheibe part no. 5. Zu montierendes teil part no. 5 has to be pushed on the axis of the stepper motor until the parts no. 2 can not be compressed anymore. After remove the part no. 5 ...

  • Page 13: Varyscan

    13 varyscan ® 4 1200 hmi attention: take care that you do not twist or damage a ny parts while cleaning your scan! 3. Oiling of rotating gobos procure a syringe with a thin needle, customary in trade (grind off the tip, so it will be blunt - no risk of injury!!), and fill it with our special oil. On...

  • Page 14: Varyscan

    14 varyscan ® 4 1200 hmi channel 1 = x (pan) 170° channel 2 = y (tilt) 90° channel 3 = gobo gobo 0 (beam) dmx 000 - 031 gobo 1 dmx 032 - 063 gobo 2 dmx 064 - 095 gobo 3 dmx 096 - 127 gobo 4 dmx 128 - 255 if at dip-switch no.2 switch 4 is "on" gobo 4 dmx 128 - 254 reset dmx 255 channel 4 = colour col...

  • Page 15: Varyscan

    15 varyscan ® 4 1200 hmi rotation left (slow) dmx 222 rotation stop dmx 223 - 224 rotation right (slow) dmx 225 rotation right (fast) dmx 255 channel 8 = effect wheel open dmx 000 - 031 artificial light filter dmx 032 - 063 daylight filter dmx 064 - 095 prism dmx 096 - 127 floodfilter dmx 128 - 159 ...

  • Page 16: Varyscan

    16 varyscan ® 4 1200 hmi colour 12 dmx 096 - 103 colour 13 dmx 104 - 111 colour 14 dmx 112 - 119 colour 15 dmx 120 - 127 colour wheel rotation speed (slow) dmx 128 - colour wheel rotation speed (fast) dmx 255 channel 3 = gobo and effect wheel white dmx 0 - 9 artificial light filter dmx 10 - 19 dayli...

  • Page 17: Varyscan

    17 varyscan ® 4 1200 hmi channel 5 simmer shutter channel 6 iris and goborotation channel 1 = x (pan) 170° channel 2 = y (tilt) 90° channel 3 = gobo and effectwheel white dmx 0 - 9 artificial light filter dmx 10 - 19 daylight filter dmx 20 - 29 prism dmx 30 - 39 floodfilter dmx 40 - 51 gobo 1 white ...

  • Page 18: Varyscan

    18 varyscan ® 4 1200 hmi colour wheel rotation speed (fast) dmx 255 channel 5 = dimmer / shutter dimmer shutter closed --> blackout (bo) dmx 0 dimmer: you can perceive some light dmx 19 dimmer dmx 20 - 127 dimmer completely open dmx 128 - 137 shutter immediatelly closed dmx 138 - 139 shutter sequenc...

  • Page 19: Varyscan

    19 varyscan ® 4 1200 hmi change of eprom/ software update to change the eprom proceed as follows: remove the cover sheet for the electronic board below the mirror by taking out the 4 screws (see sketch page 36). By comparing the electronic board with the plan of electronic parts you can see the epro...

  • Page 20: Varyscan

    20 varyscan ® 4 1200 hmi plan of current circuits for varyscan ® 4 1200hmi.

  • Page 21: Varyscan

    21 varyscan ® 4 1200 hmi occupation of connectors and jumper pin colour pin colour pin colour pin colour connector x-motor 1 blue 2 green 3 rot 4 yellow jp4 y-motor 1 blue 2 white 3 rot 4 yellow jp5 effect wheel 1 blue 2 green 3 rot 4 yellow p2 colour wheel 14 blue 15 green 16 rot 17 yellow p1 shutt...

  • Page 22: Varyscan

    22 varyscan ® 4 1200 hmi r24 150r 0,6w r64 150r 0,6w r25 37r 0,6w r65 75r 0,6w r26 75r 0,6w r66 37r 0,6w r27 300r 0,6w r28 150r 0,6w r29 2r 1w r30 2r 1w r31 750r 0,6w r32 250r 0,6w r33 1,2r 1w r34 1,2r 1w r35 1,5r 1w r36 1,5r 1w r37 1,2r 1w r38 1,2r 1w r39 1,2r 1w r40 1,2r 1w c1 18pf c41 220nf c2 18...

  • Page 23: Varyscan

    23 varyscan ® 4 1200 hmi c37 no. C38 220nf c39 2,2nf c40 no. Q1-q32 bc337b p1,p2 connector db15 jp2 header5 jp3,jp4,jp5 header4.

  • Page 24: Varyscan

    24 varyscan ® 4 1200 hmi d1,d2 bridge u1 m68hc11f1fn u2 eprom 27c256 u3 am26ls32 ic dmx-in u4 pal22v10 u5 74hc245 u6 no. U7 pbl3771 driver x-motor u8 pbm3960 u9 pbl3771 driver y-motor u10 pbm3960 u11 tca3727 driver for goborotation u12 74hc574 u13 74hc574 u14 74hc574 u15 tca3727 driver for iris u16 ...

  • Page 25

    25 varyscan ® 4 1200 hmi plan of electronic parts for electronic board of varyscan ® 4 1200 hmi.