1. DL manuals
  2. JBL
  3. Speakers
  4. 305P MkII
  5. Owner's Manual

JBL 305P MkII Owner's Manual - Product Registration

Manual is about: 3 MkII series

Summary of 305P MkII

  • Page 1

    Owners manual 305p mkii 5" powered studio monitor 306p mkii 6" powered studio monitor 308p mkii 8" powered studio monitor lsr310s 10" powered studio subwoofer.

  • Page 2: Product Registration

    2 thank you for your purchase of jbl 3 series studio monitors to receive important information as it becomes available, please take a moment to register your 3 series speakers at www.Jblpro.Com/registration. Product registration.

  • Page 3: Table of Contents

    3 table of contents section 1: important safety instructions 4 section 2: introduction ...

  • Page 4

    4 section 1: important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufac...

  • Page 5: Section 2: Introduction

    5 section 2: introduction congratulations on your purchase of jbl professional 3 series studio monitors. The 3 series meet jbl’s high standards for accuracy and long-term reliability in demanding professional applications. All 3 series models incorporate jbl professional transducer and network techn...

  • Page 6

    6 lsr310s powered studio subwoofer features producing extended low frequency response into the 20hz region, the lsr310s is the perfect match for the 3 series mkii studio monitors. The lsr310s feature set includes: • a magnetically-shielded low frequency transducer, equipped with a 1.5" voice coil an...

  • Page 7

    7 each 3 series carton includes the following items: • one 3 series mkii studio monitor or 3 series subwoofer • one power cord • quick setup guide • four peel-off rubber pads (305p, 306p, and 308p mkii models only) unpacking when removing a speaker from its packaging, we recommend the following proc...

  • Page 8

    8 • ideally, 3 series mkii studio monitors should be placed on suitable speaker stands, rather than on the work surface. This will reduce resonance and deterioration of low frequency performance caused by the speaker’s mechanical coupling with the work surface. • for optimum imaging, the left and ri...

  • Page 9

    9 audio connections note: before making audio connections, ensure the volume control on each 3 series speaker/subwoofer is set to the full counter-clockwise (minimum) position. The 3 series speakers are equipped with balanced xlr and 6mm (¼") trs inputs for connection to professional computer audio ...

  • Page 10

    10 1 3 4 8 5 6 7 front view back view 2 features 1. High frequency transducer (tweeter) – this transducer reproduces high frequency signals. 2. Waveguide – the specially designed jbl image control waveguide enhances imaging and optimizes the blend of direct and reflected sound in the room, ensuring ...

  • Page 11

    11 input panel 9. Xlr input – connect professional equipment to this connector using a balanced xlr plug. 10. 6mm (¼") input – connect professional equipment to this connector using a 6mm (¼") balanced plug. Connect consumer equipment to this connector using a 6mm (¼") unbalanced plug. 11. Input sen...

  • Page 12

    12 2 5 1 4 1 3 3 front view bottom view back view features 1. Low frequency transducer (woofer) – this transducer reproduces low frequency signals. 2. Power led – this led illuminates when power is connected and the power switch is set to on. 3. Feet – these feet elevate the subwoofer to prevent aco...

  • Page 13

    13 input panel 6. Right and left xlr inputs – connect professional equipment to these connectors using balanced xlr plugs. 7. Right and left 6mm (¼") – connect professional equipment to these connectors using 6mm (¼") balanced plugs. Connect consumer equipment to these connectors using 6mm (¼") unba...

  • Page 14

    14 audio connections connect signal sources to either the xlr or 6mm (¼") input connectors. Connect a single signal source to the speaker using either the xlr input connectors, or the 6mm (¼") trs input connectors. Do not connect multiple signal sources to the xlr and 6mm (¼") input connectors simul...

  • Page 15

    15 crossover settings and bass management “bass management” is a term that refers to the practice of using a subwoofer to reproduce the bass frequencies of the main channels. Because of the physiology of the human ear, low frequencies are largely non-directional. Given an adequate listening distance...

  • Page 16

    16 two channel systems left speaker (rear panel) right speaker (rear panel) subwoofer (rear panel) mixer section 6: system connections.

  • Page 17

    17 surround sound systems subwoofer (rear panel) computer audio system left speaker (rear panel) right speaker (rear panel) center speaker (rear panel) computer audio interface left surround speaker (rear panel) right surround speaker (rear panel).

  • Page 18: Section 7: Troubleshooting

    18 issue: there is no sound from the speakers. • confirm the power cable is connected to the speaker and the power switch is set to the on position. • make sure the power led is illuminated on the front of the speaker. • make sure a signal source is connected to the speaker and that it is producing ...

  • Page 19: Section 8: Specifications

    19 305p 306p 308p lsr310s frequency range (-10dbv): 43hz – 24khz 39hz – 24khz 37hz – 24khz 27hz crossover: 1725hz 4th order acoustic linkwitz-riley 1425hz 4th order acoustic linkwitz-riley 1800hz 4th order acoustic linkwitz-riley - - - maximum continuous spl: 94 db* 98 db* 102 db* 105 db** maximum p...

  • Page 20

    20 mailing address: jbl professional 8500 balboa blvd. Northridge, ca 91329 shipping address: please contact jbl professional customer service for shipping information prior to repairs. Customer service: monday through friday 8:00am – 5:00pm pacific coast time in the u.S.A. (800) 8jblpro (800.852.57...

  • Page 21

    21 the jbl limited warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. Jbl amplifiers are warranted for three years from the date of original purchase. Enclosures and all other jbl products are warranted...

  • Page 22

    Part number: 5096517-00-a.