1500 array, 1400 array, 1000 array, 880 array, 800 array jbl project array ™ owner’s guide ® 880 800 1000 1400 1500 1500 project arrray project arrray project arrray project arrray project arrray 880 800 1000 1400 1500 1500 project arrray project arrray project arrray project arrray project arrray 8...
2 read first! Important safety precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manu...
Included 1400 array 2 long 1/4" x 20 allen-head bolts 1 short 1/4" x 20 allen-head bolts 1 logo plate 1 allen-head screw driver 1 rubber hole plug 4 metal coasters (to protect floor from spiked feet) 1000 array, 800 array and 1500 array 4 metal coasters (to protect floor from spiked feet) project ar...
Surround speakers front speakers the front speakers should be placed the same distance from each other as they are from the listening position, with tweeters at about the same height from the floor as the listeners’ ears will be. The center channel speaker should be placed below the television and n...
6.1-channel system a 6.1-channel system will consist of a 5.1-channel configuration, as shown on page 4, with the addition of a rear center speaker placed midway between the two surround speakers, and further to the rear than the surrounds. The rear center speaker should not call more attention to i...
1400 array assembly due to the weight of the 1400 array horn module, it is packed separately from the low-frequency enclosure. It is a very simple procedure to install the module, and the necessary instructions are listed below. The required allen-tipped screw driver is included in the accessory pac...
Step 7 step 8 step 9 step 11 7 project array om 1/10/06 12:21 pm page 7.
Speaker connections s su ub bw wo oo of fe er r c co on nt tr ro olls s a an nd d c co on nn ne ec ct tiio on ns s ( (1 15 50 00 0 a ar rr ra ay y o on nlly y) ) 0 1 2 34 56 7 8 the 1500 array includes a line output. This output allows you to “daisy chain” one 1500 array to multiple 1500 array subwo...
Power on plug your subwoofer’s ac cord into a wall outlet. Do not use the outlets on the back of the receiver. Initially set the subwoofer level (volume) control ¢ to the “min” position. Turn on your sub by pressing the power switch ª on the rear panel. Auto on/standby with the power switch ª in the...
Important: make sure all equipment is turned off before making any connections. For speaker connections, use a high-quality speaker wire with polarity coding. The side of the wire with a ridge or other coding is usually considered positive (+) polarity. Note: if desired, consult your local jbl deale...
If there is no sound from any of the speakers: • check that receiver/amplifier is on and a source is playing. • check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured. • review pr...
Specifications all features and specifications are subject to change without notice. Jbl and harman international are trademarks of harman international industries, incorporated, registered in the united states and/or other countries. Project array, pro sound comes home and sonoglass are trademarks ...
