Summary of AEC65
Page 1
I ndoor speakers cat. Nos. Aec65 aec80 aei65 aei80 aem65 user guide aec65 aec80 ceiling speaker aem65 dual tweeter stereo ceiling speaker aei65 aei80 in-wall speaker pk-93410-10-00-2a.
Page 2: Overview
Overview thank you for choosing leviton architectural edition™ powered by jbl. Please take a moment to register your product on our web site at www.Leviton.Com. It enables us to keep you posted on our latest advancements, and helps us to better understand our customers and build products that meet t...
Page 3: Speaker Placement
Speaker placement wall 40 0 –60 0 wall wall wall wall 5-6 ft. Front speaker mounting rear speaker mounting ceiling speaker mounting proper placement of the speakers is an important step in obtaining the most realistic soundstage possible. These recommendations are for the optimum placement of the lo...
Page 4: Speaker Connections
Speaker connections the surround speakers should not call attention to themselves. They should provide a diffuse, ambient sound accompanying the main program material heard in the front speakers. In dolby* digital and dts® systems, aim the tweeters toward the listening position at ear-level height. ...
Page 5: Wire Length
Of multichannel surround sound systems, connecting all of the speakers in your system with the correct polarity remains equally important in order to preserve the proper ambience and directionality of the program material. To use the push-type speaker terminals, press the red (+) or black (–) cap fo...
Page 6: Construction:
In-wall speaker installation – existing construction: ≥1/2" ≥1/2" ≥1/2" level template step 1: remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the ...
Page 7: Construction:
Ceiling speaker installation – existing construction: ≥ 1/2" ≥ 1/2" ≥ 1/2" level template step 1: remove the grille from the speaker frame by pulling on the paper tab. If he tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of th...
Page 8: Painting The Speaker
The speakers feature unique swivel mounts for the tweeters that enable you to aim the very directional high frequencies toward the listening position, at ear-level height. Before installing the speaker grille, gently press on the outer edge of the tweeter mount to adjust the position of the tweeter....
Page 9: Troubleshooting
Troubleshooting if there is no sound from any of the speakers: • check that receiver/amplifier is on and a source is playing. • check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured or ...
Page 10: Specifications
Specifications aem65 frequency response 40hz–20khz (+10db) recommended maximum amplifier power † 100 watts impedance 8 ohms nominal sensitivity 88db (2.83v/1m) crossover frequency 3,000hz woofer 6-1/2" titanium-laminate cone w/rubber surround tweeter dual 3/4" (19mm) titanium-laminate dome, w/ellipti...
Page 11: Specifications
Aec80 frequency response 32hz–20khz (+10db) recommended maximum amplifier power † 100 watts impedance 8 ohms nominal sensitivity 89db (2.83v/1m) crossover frequency 3,000hz woofer 8.0” titanium-laminate cone w/rubber surround tweeter 1" titanium-laminate dome, w/elliptical oblate spheroidal tm wavegu...
Page 12: Specifications
Aei80 frequency response 30hz–20khz (+10db) recommended maximum amplifier power † 100 watts impedance 8 ohms nominal sensitivity 89db (2.83v/1m) crossover frequency 3,000hz woofer 8.0" titanium-laminate cone w/rubber surround specifications for additional information, contact levitonʼs techline at 1-...