JBL ATX 100S (220-240V) Owner's Manual - Thank You For Choosing Jbl

Manual is about: ATX Series 230V

Summary of ATX 100S (220-240V)

  • Page 1

    X + 0 + y 2 0 m h z o w n e r ’ s g u i d e product line: atx20/30/40/60/10c/100s (230v) atx series design goal: bring the thrill of live performance and movie sound to the home environment by calling on jbl’s professional engineering leadership. Professional reference: home loudspeaker series model...

  • Page 2: Thank You For Choosing Jbl

    2 for more than 50 years, jbl has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re con- fident that the jbl system you have chosen will provide every note of enjoyment that you expected – ...

  • Page 3

    3 near these heat-dissipation systems may possibly affect the long term reliability of both your amplifier and the objects placed above it. Do not place cds, record jackets, owner’s manuals or other paper on top of or beneath the unit or in between products containing amplifiers in a stack. This wil...

  • Page 4: Speaker Placement

    4 1.52 – 1.83m (5 – 6 ft.) 0 – 0.61m (0 – 2 ft.) subwoofer surround speakers front speakers center channel speaker speaker placement placement atx series loudspeakers are designed to give very good per- formance in a wide variety of placements. Best results, how- ever, will be obtained when the spea...

  • Page 5

    5 subwoofer placement & operation subwoofer start with the subwoofer as close to one of the front corners as possible to take advantage of solid-angle gains. If you get too much bass, adjust the ”volume” towards ”min”. The result will be lower distor- tion and higher reliability. If the excessive ba...

  • Page 6: Operation

    6 operation with lfe connection if you are using the lfe input, the subwoofer's crossover control is not active, because this function is controlled by your surround processor. When using the lfe input, set the subwoofer's volume con- trol to "max" and calibrate the subwoofer level along with the ot...

  • Page 7: Speaker Connections

    7 speaker connections separate and strip the ends of the speaker wire as shown. Speakers and amplifiers/ receivers have corresponding (+) and (–) terminals. The (+) lead of the speaker wire is noted with a stripe. It is impor- tant to connect all the speakers identically: (+) on the speaker to (+) o...

  • Page 8: Line Level

    8 line level if your receiver has a pair of stereo subwoofer outputs, con- nect interconnect cable from the receiver's left and right subwoofer outputs to the corre- sponding inputs marked line level in l and r on the subwoofer. If your receiver has a single subwoofer output or a dedi- cated lfe out...

  • Page 9: Troubleshooting

    9 subwoofer crossover subwoofer level volume subwoofer playback level can be adjusted using the rear panel volume control. For detailed information on fine-tuning volume and crossover frequency, see page 6. Crossover frequency the crossover frequency knob determines the highest frequency your subwoo...

  • Page 10: Atx Series

    Jbl consumer products 250 crossways park drive, woodbury, ny 11797 europe: 2. Route de tours, 72500 château du loir, france www.Jbl.Com ©2002 jbl, incorporated. Jbl is a registered trademark of jbl, incorporated. Part no.1111-atxseries refinements may be made on occasion to existing products without...