1. DL manuals
  2. JBL
  3. Subwoofer
  4. BASSPRO
  5. Owner's Manual

JBL BASSPRO Owner's Manual

Summary of BASSPRO

  • Page 1

    Thank you for choosing the jbl basspro. Basspro has been designed to deliver great bass performance from a compact, easily installed powered subwoofer enclosure. To get the best performance from your basspro, we strongly recommend that installation be entrusted to a qualified professional. Although ...

  • Page 2

    Installation warning: playing loud music in an automobile can hinder your ability to hear traffic and permanently damage your hearing. We recommend listening at low or moderate levels while driving your car. Jbl accepts no liability for hearing loss, bodily injury or property damage resulting from t...

  • Page 3

    Installing the remote connecting the subwoofer level control to basspro the subwoofer level control may be mounted under the dash or dismantled and mounted in the dash for a factory- installed appearance. Under-dash mounting select a mounting location that allows easy access to the control while dri...

  • Page 4

    Power connections connecting power to basspro is shown in figure 7 . Please observe the following installation tips: when using the high-level input connections, basspro will automatically turn on when you turn on your radio. In this case, the remote (rem) connection is not needed. Use at least #20 ...

  • Page 5

    Applications basspro is equipped with two line-level (rca) inputs and two high-level inputs. To help you plan the installation of basspro, we have included two system application diagrams in figures 8 and 9 . For more installation suggestions, contact your local authorized jbl car audio dealer. Figu...

  • Page 6

    Controls and functions bass pro has controls and indicators that help simplify sonic integration with almost any vehicle’s unique acoustic properties. These controls are located on the amplifier panel, as shown in figure 10 . Power led gain control crossover remote bass control auto turn-on power le...

  • Page 7

    Troubleshooting problem causes and solutions power led not lit. 1. Fuse is blown and needs replacement. 2. Head unit not functioning properly. 3. Check remote turn-on, power and ground connections. Power led is lit but there is no bass. 1. Inputs are not connected. Check connections. 2. Head-unit fa...

  • Page 8

    Amplifier power: 100 watts frequency response: 20hz – 120hz fuse rating: 20a max current draw: 12a idle current draw: input sensitivity: 50mv to 4v line-level input; 1v to 16v universal interface crossover frequency: 70hz – 120hz crossover slope: 12db dimensions (l x w x h): 16-1/8" x 9-1/2" x 12-1/...