JBL CINEMA SB400 Quick Start Manual

Manual is about: powered soundbar speaker

Summary of CINEMA SB400

  • Page 1

    Cinema sb400 powered soundbar speaker thank you for choosing this jbl ® product the jbl cinema sb400 powered soundbar speaker system is a complete, integrated sound system that will create an extraordinarily realistic cinema experience in your own living room. The powered soundbar unit can mount on ...

  • Page 2

    2 soundbar rear-panel controls and connections power switch power cord connector eq switch hdmi input connectors pairing button and led hdmi arc tv out connector optical input connector aux input connector power switch: set this switch to the “on” position to activate the soundbar. In normal operati...

  • Page 3

    Www.Jbl.Com e ngli sh 3 bluetooth button (soundbar only): press this button to play the audio stream from a paired bluetooth device through the soundbar. (the bluetooth source indicator led will illuminate when a paired bluetooth device is the active source.) press and hold this button to force the ...

  • Page 4

    4 soundbar placement placing the soundbar on a table if your tv is placed on a table, you can place the soundbar on the table directly in front of the tv stand, centered with the tv screen. As long as the surface of the table is flat, the soundbar will rest on its metal feet . • set the soundbar’s e...

  • Page 5

    Www.Jbl.Com e ngli sh 5 connections soundbar audio/video connections hdmi arc tv out: if your tv has an hdmi input, use an hdmi cable (not supplied) to connect it to the soundbar’s hdmi arc tv out connection. The soundbar will pass video from source devices connected to its hdmi input connectors, al...

  • Page 6

    6 using your soundbar system turning the soundbar on and off set the soundbar’s power switcn to the “on” position. Press the power button on either the soundbar or the remote to turn the soundbar on. To put the soundbar in the standby mode, press either power button while the soundbar is on. Power b...

  • Page 7

    Www.Jbl.Com e ngli sh 7 bluetooth operation to wirelessly stream audio to the soundbar from a bluetooth-enabled device: 1. Confirm that the soundbar is in the bluetooth pairing mode (the bluetooth button led will be flashing blue). If the led is not flashing blue, press and hold the bluetooth button...

  • Page 8: Phase

    8 boosting the bass press the remote’s bass boost button to enhance low-frequency performance, resulting in bass with more impact, which you may prefer while watching movies or listening to music. The osd will display “bass on” as the sound mode. There is no harm in experimenting with this control. ...

  • Page 9

    Www.Jbl.Com e ngli sh 9 a) hold down soundbar’s volume + button b) press tv remote’s volume up button • press the tv remote’s volume down button while pressing and holding the soundbar’s volume – button. If the programming was successful the soundbar’s surround button will change from amber to solid...

  • Page 10

    Harman international industries, incorporated 8500 balboa boulevard, northridge, ca 91329 usa © 2012 harman international industries, incorporated. All rights reserved. Jbl is a trademark of harman international industries, incorporated, registered in the united states and/or other countries. The bl...