Cst55, csb5, csc55, css10 jbl cinema sound ™ owner’s guide ® cst55 csc55 csb5 css10 english.
2 read first! Important safety precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manu...
3 included each model sold separately thank you for choosing jbl for more than 60 years, jbl has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the jbl system you have cho...
4 speaker placement subwoofer surround speakers front speakers 0–2 ft 0–0.6m the front speakers should be placed the same distance from each other as they are from the listening position. The csb5 speakers should be placed at about the same height from the floor as the listeners’ ears will be, or th...
5 english the csc55 center channel and the csb5 are designed to be mounted on the wall. There are two (2) fixed-mount wall brackets provided for the csc55, and one for the csb5. Each speaker bracket will require up to three 1-1/2" #10 wood screws; each screw should be fastened to a wall stud. If a w...
6 connection tips speaker connections separate and strip the ends of the speaker wire as shown. Speakers and electronics terminals have corresponding (+) and (–) terminals. Most manufacturers of speakers and electronics, including jbl, use red to denote the (+) terminal and black to denote the (–) t...
7 dolby pro logic ® (non-digital) – line level use this installation method for dolby pro logic applications (not dolby digital, dts or other digital processing), where the receiver/processor is equipped with a subwoofer output, or a volumecontrolled preamp (line-) level output: use rca-type interco...
8 subwoofer operation press the master power switch (marked “power” a) to the on position to use the subwoofer. The css10 subwoofer will automatically turn on or go into standby (sleep) mode as described below. When your receiver or amplifier is off, or is not sending program material to the subwoof...
9 if there is no sound from any of the speakers: • check that receiver/amplifier is on and a source is playing. • check that the powered subwoofer is plugged in and is turned on (power switch a pushed in). • check all wires and connections between receiver/ amplifier and speakers. Make sure all wire...
System frequency response 27hz – 30khz (–6db) cst55 maximum recommended amplifier power 150 watts* power handling 50w continuous/300w peak frequency response 55hz – 30khz (–6db) nominal impedance 8 ohms sensitivity 90db @ 1 watt/1 meter tweeter one 3/4" (19mm) titanium-laminate dome, video-shielded ...
