User’s guide c o n t r o l ® 4 7 c / t c o n t r o l ® 4 7 l p c o n t r o l ® 4 7 h c c o n t r o l ® 4 5 c / t c o n t r o l ® 4 2 c c o n t r o l ® 4 0 c s / t rev d.
Table of contents jbl professional control contractor 40 series product description .....................................................1 product feature identification ..................................2 control 40 series preparation ...................................3 control 40 series installat...
1 control 47c/t features extended bass performance with a wide 120° of coverage that allows fewer speakers to cover a large space. Ideal for a wide variety of applications, the control 47c/t is perfect for settings ranging from restaurant and retail to large casinos and beyond. Control 47lp is a low...
Product feature identification 2 jbl professional control contractor 40 series shown with included grille removed. Integrated back can conical rbi ® waveguide tuning port suspension tabs (control 47c/t & 47hc models only) (control 47c/t shown) two-landing dog ear tweeter transformer tap / bypass (lo...
The installation of the control contractor 40 series in-ceiling loudspeakers can be accomplished, if necessary, without requiring access above the ceiling. Bracketry for use with either suspended ceilings or sheetrock ceilings is included (see below for additional details on the control 42c). The lo...
The installation system has been designed so that the entire installation can be accomplished from beneath the ceiling, for instances when access above the tile is not possible or practical. However, in some cases it may be easier with removable ceiling tiles to access from both the top and bottom o...
5 jbl professional control contractor 40 series wiring instructions control contractor 40 series in-ceiling loudspeakers include euroblock locking input connectors that allow the system to be “pre-wired”. Connecting the wiring to the euroblock -- connect the wiring to the removable locking connector...
Wiring instructions, con’t 6 jbl professional control contractor 40 series hookup schemes for subsequent speakers using loop-through terminals -- by connecting the wire pair of a subsequent speakers to the “loop thru” on the control 40 series loudspeakers all subsequent speakers will be disconnected...
Painting & contacting jbl painting control contractor 40 series loudspeakers the trim ring and grille of control contractor 40 series loudspeakers can be painted to match almost any decor. The speaker’s polystyrene rim accepts almost any type of latex or oil based paint. For best results, the follow...
Control 47c/t: frequency range (-10 db) 1 : 55 hz - 20 khz frequency response (± 3 db) 1 : 75 hz - 17 khz power capacity 2 : 150 watts continuous program power 75 watts continuous pink noise nominal sensitivity (2.83v/1m) 1 : 91 db nominal coverage angle 3 : 120° conical coverage directivity factor ...
9 jbl professional control contractor 40 series specifications control 47hc: frequency range (-10 db) 1 : 55 hz - 17 khz frequency response (± 3 db) 1 : 70 hz - 14 khz power capacity 2 : 150 watts continuous program power 75 watts continuous pink noise nominal sensitivity (2.83v/1m) 1 : 93 db nomina...
440921-005 8500 balboa boulevard northridge, ca 91329 usa visit us online at www.Jblpro.Com 05/14 control 40cs/t: frequency range (-10 db) 1 : 30 hz - 300 hz frequency response (± 3 db) 1 : 50 hz - 180 hz power capacity 2 : 200 watts continuous program power 100 watts continuous pink noise nominal s...
