JBL Control Control 25AV Specifications

Control

®

25AV

Shielded Indoor/Outdoor

Monitor Speaker

Key Features:

Video shielded for use near video

monitors.

Extremely smooth frequency response.

Stainless steel grille for harsh

environments.

60 Watt transformer for 70V or 100V

lines, with 8

thru.

SonicGuard

TM

overload protection.

130 mm (5

¼

") polypropylene coated

woofer, 10 mm (

¾

") titanium coated

horn-loaded tweeter.

Includes 

InvisiBall

®

mounting

hardware and sealed input panel cover.

Screw-down input terminals.

100° x 100° high frequency horn.

The Control

®

25AV utilizes a deep

cabinet, high power components and

complex network to achieve extremely

smooth high fidelity performance from a

compact 2-way loudspeaker. 

Premium performance capability and

even coverage ensures excellent sound

quality throughout the listening area.

Magnetic shielding allows use of the

speaker in close proximity to video moni-

tors.

The top-quality transformer, with

reduced saturation, allows use on either

70 volt or 100 volt distributed speaker

lines, with similar performance fidelity. In

the bypass position, the high 8

imped-

ance allows use of more speakers on a

loudspeaker line. 

The unique, global patent pending

InvisiBall

®

mounting method is simple to

install, aims easily, and provides a high

degree of theft deterrence.

The cabinet accepts a variety of paints

to match any décor. 

Weather resistance is maximized by a

stainless steel grille, which is paintable.

Coating the woofer in polypropylene and

terminating its circumference in JBL’s

WeatherEdge

TM

, a seamless, butyl rubber

extension of the woofer surround, pro-

tects critical transducer elements. The

polycarbonate tweeter diaphragm is rein-

forced with a thin film of titanium for

added rigidity and endurance. Nickel/zinc

rust-resistant terminals ensure a secure

input connection.

JBL’s exclusive SonicGuard overload

protection is virtually inaudible to the lis-

tener, ensuring reliability while providing

full fidelity sound. 

The Control 25AV can be used full

range or low frequencies can be further

augmented with the addition of one of

the Control Contractor subwoofer models.

Available in black or white (-WH)

Specifications:

Freq. Range (-10 dB)

1

: 70 Hz - 23 kHz

Midrange (±1.5 dB, typical)

2

: 130 Hz - 14 kHz

100 Hr Power Capacity

3

: 200 Watts Continuous Program Power

100 Watts Continuous Pink Noise

Nominal Coverage: 100° x 100°

Nominal Sensitivity

4

: 87 dB SPL, 1W @ 1 m (3.3ft)

Nominal Coverage: 100° x 100°

Maximum SPL @ 1m: 113 dB continuous peak pink noise

107 dB continuous average pink noise

103 dB continuous average music or speech

Directivity Factor (Q): 4.9, averaged 500 Hz to 4 kHz

Directivity Index (DI): 6.9 dB, averaged 500 Hz to 4 kHz

Nominal Impedance: 8 ohms

Minimum Impedance: 6.7 ohms at 230 Hz

Crossover Type: Second Order Lowpass, Second Order Highpass, Complex

Optimization for Maximally Flat Response

Transformer Taps:

1

70V: 60W, 30W, 15W, 7.5W taps (Taps #4,#3, #2 & #1)

100V: 60W, 30W, 15W taps (Taps #3, #2, & #1)

Thru position: 8

nominal

Transducers:

Low-Frequency: 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge

surround, 25 mm (1 in) voicecoil on kapton former

High-Frequency: 20 mm (.75 in) titanium coated PEI

Physical:

Enclosure Material: High Impact polystyrene

Grille: Painted stainless steel, black or white to match cabinet, paintable

Overload Protection: Full-range power limiting to protect network and transducers. Internal

fuse to protect during exceptional overload condition

Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC

529 IP-X4 splashproof rating

Termination: Screw-down terminal strip, zinc-plated copper base, nickel plated

metal screws/washers, accepts up to 9 mm outside 4 mm inside open

lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)

Safety Agency Rating: Transformer is listed per UL1876

Colors: Black or white (-WH)

Rotation: Against wall on InvisiBall Base: 37° vertical 44° horizontal

On bracket: 44° all directions

Dimensions (H x W x D): 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)

Net Weight (ea): 4.0 kg (9 lbs)

Shipping Weight (pair): 9.0 kg (20 lbs) per pair

Included Accessories: 1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100

mm InvisiBall hex wrench

Optional Accessories:

MTC-25V

for vertical columnar mounting of up to 3 speakers

MTC-25/23H

for horizontal splaying of 2 speakers. Three brackets

array either 3 or 6 speakers in a hanging array module for 360°

horizontal coverage.

MTC-28/25CM

to install speaker down from the ceiling.

Check JBL Control Contractor Bracket and Adapter Handbook.

MTC-xxWMG

WeatherMax™ Stainless Steel Grille with a three-layer

backing, including vapor barrier to break up driving precipitation.

Available in black or white (-WH).

1

In half-space (on wall).          

2

In full-space

3

Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously.

Continuous program power is a conservative expression of the system’s ability to handle normal speech and music

program material and is defined as 3 dB above the Continuous Pink Noise Rating.

4

Half-space (on wall) averaged 100 Hz to 10 kHz.

JBL continually engages in research related to product improvement. Changes introduced into existing products with-

out notice are an expression of that philosophy.

Professional Series