X + 0 + y 2 0 m h z o w n e r ’ s g u i d e p r o d u c t l i n e : scs 140, scs 146, dsc 1000 (230v) d e s i g n g o a l : bring the thrill of live performance and movie sound to the home environment by calling on jbl’s professional engineering leadership. S at e l l i t e t y p e : titanium-lamina...
I n c l u d e d four satellites for left/right front and surrounds. Wall- mount brackets. Scs 146 contains an additional satellite to be used as surround back. One center channel speaker . Powered subwoofer. 2 for more than 55 years, jbl has been involved in every aspect of music and film recording ...
3 1.52 – 1.83m (5 – 6 ft.) 0 – 0.61m (0 – 2 ft.) subwoofer front speakers center channel speaker s p e a k e r p l a c e m e n t surround speakers (scs 146) 1.52 – 1.83m (5 – 6 ft.) surround speakers (scs 140) the front speakers should be placed the same distance from each other as they are from the...
4 m o u n t i n g o p t i o n s satellites and surrounds on shelves. Wall-mounting attach plate to wall. The brackets should be placed, if possible, so that the screws will fasten into a wooden wall stud. If that is not possible, use properly selected wall anchors. The customer is respon- sible for ...
5 separate and strip the ends of the speaker wire as shown. Speakers and electronics terminals have corresponding (+) and (–) terminals. Most manufacturers of speakers and electronics, including jbl, use red to denote the (+) terminal and black for the (–) terminal. The (+) lead of the speaker wire ...
6 dolby* pro logic* (non-digital) – speaker level (scs 140 and scs 146) use this installation method for dolby pro logic applications (not dolby digital, dts ® or other digital processing), where the receiver/processor does not have a subwoofer output, or a volume-controlled preamp (line-) level out...
7 dolby pro logic (non-digital) – line level (scs 140 and scs 146) use this installation method for dolby pro logic applications (not dolby digital, dts ® or other digital processing), where the receiver/processor is equipped with a subwoofer output, or a volume-controlled preamp (line-) level outpu...
8 o p e r a t i o n min max subwoofer level min max subwoofer level move the master power switch (marked “power” ¡) to the “ • ” (on) position to use the subwoofer. The scs 140 subwoofer will automatically turn itself on or go into standby (sleep) mode when left in the standby mode (“auto/on” switch...
9 if there is no sound from any of the speakers: • check that receiver/amplifier is on and a source is playing. • check that the powered subwoofer is plugged in, its power switch ¡ is switched on to the “on•” position. • check all wires and connections between receiver/ amplifier and speakers. Make ...
Jbl consumer products 250 crossways park drive, woodbury, ny 11797 europe: 2. Route de tours, 72500 château du loir, france www.Jbl.Com ©2003 jbl, incorporated. Jbl is a registered trademark of jbl, incorporated. Part no.406-000-00969 refinements may be made on occasion to existing products without ...
