JBL G SUB 10 Owner's Manual - Outputs
4
amplifier and G Sub10 subwoofer, just
be sure to connect both left and right
hookup wires identically. Push down
on the button next to the terminal hole
and insert the wire through the hole.
For each channel, connect the red
terminal on the receiver/TV/source
amplifier to the red or (+) "Speaker
Level Input" connection terminal on
the G Sub10 subwoofer, and the
black to the black or (–). Connecting
the subwoofer in this manner ensures
that both channels will be in phase;
that is, working together, not in
opposition.
CAUTION: Never attach inputs to
both line-level and speaker-level
inputs of the same channel at the
same time.
OUTPUTS
Your subwoofer has a speaker output
terminal block to enable the signal to
Receiver or Amplifier
Subwoofer or Line Output
Level Phase Crossover Freq
+ R – – L +
+ R – – L +
+ R – – L +
Speaker Level Input
(from amplifier)
Speaker Level Output
(to external speakers)
R L
L
R
Min Max 50 (Hz) 200
Line
Input
G Sub10 Subwoofer
Reverse Normal
Speaker
Wire
Figure 2: Speaker- Level Input Connection