JBL HT PS300 Simple Setup Manual

Summary of HT PS300

  • Page 1

    Ht ps300 powered subwoofer simple set-up guide thank you for choosing jbl. For over 50 years, jbl has been involved in every aspect of musical and film recording and reproduction, from live performances to monitoring the recordings you play in your home, car, or office. We’re confident that the jbl ...

  • Page 2: Read First!

    Read first! Important safety precautions! 1. Read instructions. All the safety and operating instructions should be read before the product is operated. 2. Retain instructions. The safety and operating instructions should be retained for future reference. 3. Heed warnings. All warnings on the produc...

  • Page 3: One.

    One. Speaker placement the ideal placement for the ht ps300 is along the wall where the front speakers are installed. Because of the side firing design of the sub- woofer, it is recommended that the woofers be placed in a corner at least six inches away from the side walls. Since the ht ps300 is vid...

  • Page 4: Two.

    Two. Hookup line-level inputs thx® mode: if your surround processor/ receiver is thx certified or contains a subwoofer crossover. High level inputs high level outputs l r l r phase 0 ° 180 ° on output level crossover frequency stby 0 10 50hz 120hz + – – + + – – + line thx thx controls bypassed line ...

  • Page 5

    Normal mode: if your surround processor/ receiver does not contain a subwoofer crossover. High level inputs high level outputs l r l r phase 0 ° 180 ° on stby 0 10 50hz 120hz + – – + + – – + line thx thx controls bypassed line level input input output ( ) subwoofer out l r output level crossover fre...

  • Page 6: Operation

    Operation the ht ps300 contains a signal sensing auto turn- on/off circuit. This feature will automatically turn the subwoofer on when you turn your system on and begin playing any program material. The subwoofer will return to standby when no signal is received for approximately 5 minutes. The powe...

  • Page 7: Troubleshooting

    If there is no output from the subwoofer, check the following: • system is on and a source is playing. • the ht ps300 is plugged in and “power” is on. • if you are using the thx input, make sure the thx/ normal switch is set to “thx.” • if you are not using the thx input, make sure the thx/ normal s...

  • Page 8: Specifications

    Jbl consumer products 80 crossways park west, woodbury, ny 11 797 8500 balboa boulevard, northridge, ca 91329 1-800-336-4jbl (4525) (usa only) © 1996 jbl, incorporated. Jbl is a registered trademark of jbl, incorporated. Lucasfilm and thx are registered trademarks of lucasfilm ltd. Printed in canada...