JBL HTPS-400 Owner's Manual

Other manuals for HTPS-400: Brochure, Service Manual

Summary of HTPS-400

  • Page 1

    X + 0 + y 2 0 m h z x + 0 + y 2 0 m h z ” x + 0 + y 2 t h a n k y o u f o r c h o o s i n g j b l for more than 50 years, jbl has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident...

  • Page 2: Caution

    2 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install...

  • Page 3: U N P A C K I N G

    3 u n p a c k i n g feet your htps-400 subwoofer is equipped with 2 sets of feet for use depending on the type of surface the subwoofer will be placed on. Enclosed with this manual is a set of rubber self-adhesive feet for use on hard surfaces, such as wood or tile floors, and a set of spiked feet f...

  • Page 4: H O O K U P

    4 h o o k u p line-level inputs subwoofer out thx®-certified receiver/processor off auto on out in 0 ° thx 180 ° normal min. Max. 50hz 150hz green–on red–standby line phase gain crossover eq thx mode: if your surround processor/ receiver is thx-certified: note: when the thx/normal switch is set to “...

  • Page 5

    5 normal mode: use this hookup for all non- thx processors, including dolby* digital, dts ® , dolby pro logic* or stereo. Note: if using dolby digital or dts, set the crossover frequency knob fully clockwise to the maximum position. Make sure the thx/normal switch is in the normal position. . Subwoo...

  • Page 6: O P E R A T I O N

    6 o p e r a t i o n the htps-400 contains a signal-sensing auto turn-on/ turn-off circuit. This feature will automatically turn the subwoofer on when you turn your system on with the power switch in the “auto” position and begin playing any program material. The subwoofer will return to standby mode...

  • Page 7: Phase

    T r o u b l e s h o o t i n g the phase switch is used to adjust the relative polarity of the subwoofer to the other speakers. When the speakers are out of phase, the low- frequency sound waves will cancel each other out, reducing bass response. The htps-400 provides a convenient phase switch that a...

  • Page 8: Htps-400

    Jbl consumer products 250 crossways park drive, woodbury, ny 11797 8500 balboa boulevard, northridge, ca 91329 800-336-4jbl (4525) (usa only) www.Jbl.Com © 2003 harman international industries, incorporated. Jbl is a registered trademark of harman international industries, incorporated. Part no. 336...