JBL K2 S9800 Technical Manual
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance
8 Ohms
• Max Amp Power
400 Watts*
• Frequency Response
45Hz – 50kHz (– 6dB)
• Sensitivity
94dB (2.83V @ 1 meter)
• Crossover Frequencies
800Hz, 10kHz
SYSTEM COMPONENTS:
• Cabinet
K2 S9800/K2 S9800SE
(not for sale)
• Grille
337854-001
• Ultrahigh-Frequency
1" (25.4mm) 045Be
Transducer
beryllium (336318-001)
DC Resistance
3.1 Ohms, ±3%
• High-Frequency Transducer
3" (76.2mm) 435Be
beryllium (337361-001)
DC Resistance
3.6 Ohms, ±10%
• Low-Frequency Transducer
15" (381mm) 1500AL
alnico (336308-001)
DC Resistance
5.3 Ohms, ±10%
• Crossover Network
337978-001 (K2 S9800)
352043-001 (K2 S9800SE)
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep Test
6.0V Input 40Hz to 50kHz
• L.F. Aural Sweep Test
20.0V Input 20Hz to 600Hz
• H.F. Aural Sweep Test
2.0V Input 500Hz to 10kHz
• U.H.F. Aural Sweep Test
1.00V Input 7kHz to 50kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions
51" x 20" x 14-3/4"
(H x W x D)
Plus spiked feet
(1295mm x 508mm x 375mm)
• Weight
198 lb/90kg (each)
WARRANTY:
• Refer to Warranty Statement packed with each product.
* The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
PACKAGING
44
45
43
46
47
42
Legend on Pages 5-6
K2 S9800/K2 S9800SE WIRING DIAGRAM
Crossover Network
337978-001 (K2 S9800)
352043-001 (K2 S9800SE)
UHF
336318-001
+
+
GRN
GRN/BLK
YEL
YEL/BLK
ORN
ORN/BLK
HF
337361-001
LF
336308-001
BLK
RED
K2 S9800/K2 S9800SE
Rev 1 5/07
Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, New York 11797
Technical Manual
K2 S9800/K2 S9800SE