JBL OnBeat Venue LT Quick Setup Manual - Placement

2

PLACEMENT

Place OnBeat Venue LT on a shelf or table with the rear of its enclosure is at least 3" 

(76mm) away from a wall or other surface to allow the bass ports to operate properly.

CONTROLS AND INDICATORS

Bass Boost 

Button

Movie 

Button

Aux Input 

LED

Bluetooth 

LED

Volume Up/Down 

Buttons

Docking Slide (open)

LT Docking Connector

Power 

Button

Dock Input 

LED

Source 

Button

Bass Boost button:

 Press this button to enhance the bass performance. The button’s 

LED will illuminate when Bass Boost is on.

Movie button: 

Press this button to activate the Movie EQ mode, which creates an 

extra-wide sound field to compliment films and other video media. The button’s LED will 

illuminate when the Movie mode is on.

Source button:

 Press this button to cycle through the audio sources: 

Bluetooth

, docked 

device and Aux Input. The input LED for the active source will illuminate.

•  If you begin to stream audio from a paired 

Bluetooth

 device or play audio from a device 

connected to the dock while another source is playing, the OnBeat Venue LT will 

automatically switch to the new source.

Aux Input LED:

 This LED illuminates when the Aux Input is the active source.

Dock Input LED: 

This LED illuminates when the docked device is the active source.

Bluetooth

 LED: 

This LED flashes blue when the OnBeat Venue LT is in the 

Bluetooth

pairing mode, and turns solid blue when it has successfully paired with a 

Bluetooth

 device.

Power button:

 When the OnBeat Venue LT is on, press the Power button to put it into the 

standby mode. The button’s LED will illuminate solid amber when the unit is in standby. 

When the OnBeat Venue LT is in standby, press the Power button to turn it on. The button’s 

LED will illuminate solid white when the unit is on.