JBL Performance Specialist SS6 Owner's Manual

Other manuals for Performance Specialist SS6: Brochure
Manual is about: PERFORMANCE SERIES

Summary of Performance Specialist SS6

  • Page 1

    Ss6, ss6c, ss8, ss8c, sslcr, ss6dt performance ™ specialist owner’s guide ® performance specialist om 3/3/06 4:54 pm page 1.

  • Page 2: Included

    Included template/paint shield (punch out at perforation). One pair of speakers with grilles. Template/paint shield (punch out at perforation). One pair of speakers with grilles. Model ss6dt includes one loudspeaker, since it is capable of reproducing two channels of audio. Thank you for choosing jb...

  • Page 3: Speaker Placement

    3 40 0 – 60 0 wall wall 5 – 6 ft. Wall wall front speakers (ss6, ss8, sslcr) models ss6, ss8 and sslcr as rear speakers model ss6dt in-ceiling speaker placement model ss6dt has the capability of playing two channels through one loudspeaker, thanks to its dual-tweeter/dual-voice-coil construction. Si...

  • Page 4: Installation

    Phillips #2 screwdriver measuring tape utility knife pencil carpenter’s level awl tools needed performance specialist in-wall speakers are designed to be easily installed. However, if you are unsure of your ability to properly install these loud- speakers, please contact your dealer or a qualified i...

  • Page 5: Existing Construction

    5 ss6, ss8, sslcr existing construction remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the holes in the grille, and gently pull up. Determine the...

  • Page 6: Existing Construction

    Ss6c, ss6dt, ss8c existing construction remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the holes in the grille, and gently pull up. 1/2" 1/2" 1/2...

  • Page 7: New Construction

    7 new construction painting the speaker frame and grille performance specialist loud- speakers can be painted to match any décor. If you wish to change their color, the satin finish on the grille and frame will function as a primer coat. Before painting, install the paint shield (in the assembly kit...

  • Page 8: Specifications

    Ss6 frequency response 38hz – 20khz (–10db) recommended maximum amplifier power † 100 watts impedance 8 ohms nominal sensitivity 88db (2.83v/1m) crossover frequency 2,800hz woofer 6-1/2" polymer-coated aluminum cone w/rubber surround tweeter 1" pure-titanium dome, w/elliptical oblate spheroidal ™ (e...