JBL PROCOUSTICS MS-2 Owner's Manual

Other manuals for PROCOUSTICS MS-2: Owner's Manual

Summary of PROCOUSTICS MS-2

  • Page 1

    Introduction thank you for your purchase of the jbl ® procoustics ms-2 car audio optimizer. We have designed the ms-2 to dramatically improve the sound of portable audio devices in your vehicle, and to be quick and easy to connect, set up and use. This owner’s manual contains all the information you...

  • Page 2

    Connections 2 to headphone output portable music player audio output connector audio input connector power supply connector to 12v power outlet cigarette lighter/ 12v power outlet to aux input 3-ft (0.9m) audioacable (supplied) stereo 3.5mm-to-rca audio cable (not supplied) 6v power supply (supplied...

  • Page 3

    Controls and indicators power indicator: lights green when the ms-2 is on; pulses red when the ms-2 is in standby mode. See standby and on modes , on page 5, for more information. Input indicator: lights green when audio connectors are inserted and the input signal level is ok; lights red when the o...

  • Page 4

    6. Press and hold the setup button. The setup indicators will flash one at a time and you will hear brief test signals through your audio system’s speakers. Important: do not move the ms-2 while the test signals are playing. 7. Keep holding the setup button until one of the three setup indicators re...

  • Page 5

    Using the ms-2 with a powered subwoofer: 1. Press and hold the bass button for five seconds. The sub indicator light will turn on. 2. Set your subwoofer’s crossover (low-pass filter) to 50hz. 3. Turn your subwoofer’s volume control down until you can barely hear that the subwoofer is playing while y...

  • Page 6

    Harman consumer, inc. 8500 balboa boulevard, northridge, ca 91329 usa © 2011 harman international industries, incorporated. All rights reserved. Jbl is a trademark of harman international industries, incorporated, registered in the united states and/or other countries. This device complies with part...