JBL SCS SAT200 Owner's Manual

Other manuals for SCS SAT200: Owner's Manual

Page of 8

Download

Print this page

Bookmark us

INCLUDED

THANK YOU FOR CHOOSING JBL

For more than 60 years, JBL

has been involved in every

aspect of music and film

recording and reproduction,

from live performances to

the recordings you play in

your home, car or office.

We’re confident that the JBL

speaker you’ve chosen will

provide every note of enjoy-

ment that you expected –

and that when you think

about purchasing additional

audio equipment for your

home, car or office, you will

once again choose JBL.

Please take a moment to

Web site at www.jbl.com.

It enables us to keep you

posted on our latest advance-

ments, and helps us to better

understand our customers

and build products that

meet their needs and

expectations.

JBL, Incorporated

One SCSSAT300 or one SCSSAT200 with wall-

mount bracket, shelf stand and floor stand

adapter.

One 40' (12m) speaker cable.

In addition, there are two hardware bags

included. Hardware Bag A contains the metal

tightening bar and screws for the shelf stand.

Hardware Bag B contains screws for the floor

stand adapter and parts for the wall-mount

bracket.

SCS SAT300

SCS SAT200

SURROUND CINEMA

SPEAKERS

OWNER’S GUIDE

SCS-SAT300/200 OM 5/24/06 12:41 PM Page 3

1 2 3 4 5 6 7 Next › »

Summary of SCS SAT200

Page 1
Included thank you for choosing jbl for more than 60 years, jbl has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the jbl speaker you’ve chosen will provide every note of...
Page 2: Mounting Options
Mounting options on a shelf. On the wall. A wall bracket is included. On an optional stand. 2 speaker placement 1.5 – 1.8m 5 – 6 ft front speakers surround speakers both the scssat300 and the scssat200 loudspeakers are designed to be used either singly or in a pair to upgrade a 5.1-channel home thea...
Page 3
3 prepare the speaker wire as described on page 5. Thread the two conductors through the two holes in the stand bracket. Make sure to pre- serve the proper polarity (+ and – connections) by threading the positive con- ductor through the hole on the left, and the negative conductor through the hole o...
Page 4
4 important safety note: the customer is solely responsi- ble for proper selection of mounting hardware not included with the speaker, and for proper assembly and installation of the wall bracket, including but not limited to the selection of appropriate weight-bearing supports and proper use of the...
Page 5: Speaker Connections
5 connection tips speaker connections separate and strip the ends of the speaker wire as shown. The wires sup- plied with the system may already be stripped and tinned for easy insertion into the speaker terminals. You may need to separate the two conductors further in order to thread them through t...
Page 6
6 connect each speaker to the corresponding speaker terminals on your receiver or amplifier. If you are using a subwoofer, follow the directions in that owner’s guide to connect and configure it. Configure your receiver or processor to reflect the cor- rect number of speakers in your system. If you ...
Page 7: Troubleshooting
7 if there is no sound from any of the speakers: • check that receiver/ampli- fier is on and a source is playing. • check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. Make sure none of the speaker wires are frayed, cut or punctured, or to...
Page 8: Specifications
Scs sat300 maximum recommended amplifier power 100 watts power handling (continuous/peak) 50w/200w nominal impedance 8 ohms sensitivity 88db @ 1 watt/1 meter frequency response 100hz – 20khz (–6db) tweeter 1/2" (13mm) titanium-laminate dome, video-shielded midrange dual 3" (75mm) drivers, video-shie...