JBL SCS145.5 Owner's Manual - Speaker Placement

Manual is about: JBL OWNER'S GUIDE SURROUND CINEMA SPEAKERS SCS145.5

Summary of SCS145.5

  • Page 1

    Scs145.5 surround cinema speakers owner’s guide ® scs145.5 om 7/21/04 12:44 pm page 1.

  • Page 2: Read First!

    2 read first! Important safety precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manu...

  • Page 3: Included

    3 included thank you for choosing jbl for more than 50 years, jbl has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the jbl system you have chosen will provide every note...

  • Page 4: Speaker Placement

    4 speaker placement subwoofer surround speakers 5 – 6 ft. Front speakers 0-2 ft. The front speakers should be placed the same distance from each other as they are from the listening position. They should be placed at about the same height from the floor as the listeners’ ears will be, or they may be...

  • Page 5: Mounting Options

    5 mounting options on shelves. Wall-mounting on the wall. Wall brackets are included. Slide speaker onto support. On optional stands (fs1000). Place speaker and support on wall plate. Make sure that at least 1/4" (6mm) of the wall plate metal shaft is inserted into the support cavity. Continue to fi...

  • Page 6: Speaker Connections

    6 connection tips speaker connections separate and strip the ends of the speaker wire as shown. The wires supplied with the system may already be stripped and tinned for easy insertion into the speaker terminals. Speakers and electronics terminals have corresponding (+) and (–) terminals. Most manu-...

  • Page 7

    7 dolby pro logic (non-digital) – line level use this installation method for dolby pro logic appli- cations (not dolby digital, dts or other digital process- ing), where the receiver/ processor is equipped with a subwoofer output, or a volume-controlled preamp (line-) level output: use rca-type int...

  • Page 8

    8 dolby pro logic (non-digital) – speaker level use this installation method for dolby pro logic applica- tions (not dolby digital, dts ® or other digital processing), where the receiver/processor does not have a subwoofer output, or a volume-controlled preamp (line-) level output: connect your rece...

  • Page 9: Operation

    9 operation min max subwoofer level min max subwoofer level move the master power switch (marked “power” ¡) to the “ • ” (on) position to use the subwoofer. The sub145 subwoofer will automatically turn on or go into standby (sleep) mode when left in the auto mode (“auto/on” switch ™ in the “auto” po...

  • Page 10: Troubleshooting

    10 if there is no sound from any of the speakers: • check that receiver/ampli- fier is on and a source is playing. • check that the powered subwoofer is plugged in, and that its power switch ¡ is switched on (“•” position). • check all wires and con- nections between receiver/ amplifier and speakers...

  • Page 11

    11 if there is no sound from the surround speakers: • check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. Make sure none of the speaker wires are frayed, cut or punctured, or touching each other. • review proper operation of your receiver/...

  • Page 12: Specifications

    12 specifications all features and specifications are subject to change without notice. *trademarks of dolby laboratories. Dts is a registered trademark of digital theater systems, inc. Design goal: bring the thrill of live performance and movie sound to the home environment by calling on jbl’s prof...