JBL STUDIO L8400P Owner's Manual
SPECIFICATIONS
L8400P
STUDIO
™
L SERIES
OWNER’S GUIDE
®
Model
L8400P
Description
12" (300mm), 600-Watt, high-performance compact powered subwoofer
Amplifier
Power (RMS)
600 Watts
Peak Dynamic
1200 Watts
Power
†
Frequency
Response (–3dB)
22Hz – Low-pass crossover frequency
Low-Pass
Crossover
Frequencies
50Hz – 150Hz, Continuously adjustable
Low-Frequency
Transducer
12" (300mm) PolyPlas
™
cone with rubber surround and cast-aluminum chassis;
HeatScape
™
motor structure; Symmetrical Field Geometry
™
(SFG
™
); oversized
fiberglass voice coil; magnetic shorting ring
Baffle
Low diffraction, IsoPower
™
Enclosure
Sealed
Inputs
Gold-plated 5-way binding-post speaker-level; left and right line-level,
switchable to LFE
Outputs
Gold-plated 5-way binding-post speaker-level; 150Hz high-pass when using
speaker-level connection
Dimensions
(H x W x D)
16-1/2" (15-1/2" without feet) x 15-1/2" x 15-1/2"
(419mm [394mm without feet] x 394mm x 394mm)
Weight
58 lb (26.4kg)
†
The Peak Dynamic Power is measured by recording
the highest peak-to-center voltage produced by the
power amplifier with its limiters disabled, across
the output of a resistive load equal to minimum
impedance of the transducer, using a 50Hz sine wave
burst, 3 cycles on, 17 cycles off.
© 2005 Harman International Industries, Incorporated. All rights reserved.
JBL and Harman International are trademarks of Harman International
Industries, Incorporated, registered in the United States and/or other countries.
Part No. 354038-001
PRO SOUND COMES HOME
™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA
8500 Balboa Boulevard, Northridge, CA 91329 USA
2, route de Tours, 72500 Chateau du Loir, France
www.jbl.com
Dolby and Pro Logic are registered trademarks of Dolby Laboratories.
DTS is a registered trademark of DTS, Inc.
All features and specifications are subject to change without notice.