Sub 560p 400-watt, 12" (300mm) powered subwoofer owner’s manual.
2 included items 1x 1x 1x using the supplied spikes four metal spikes are supplied for use when you place the subwoofer on a carpeted surface. Using the spikes decouples the subwoofer from the floor and prevents unwanted acoustic damping. To insert the spikes: 1. Gently turn the subwoofer upside dow...
3 www.Jbl.Com e ngli sh subwoofer rear-panel controls and connections input mode switch: this switch determines if the input signal passes through the subwoofer’s built-in low-pass crossover network. • if you are connecting the subwoofer to a source device that does not have its own crossover networ...
4 placing the subwoofer the performance of a subwoofer is directly related to its placement in the listening room and its physical position relative to the other speakers in the system. While it is true that in general our ears do not hear directional sounds at the low frequencies where subwoofers o...
5 www.Jbl.Com e ngli sh operating the subwoofer turning the subwoofer on and off set the subwoofer’s power switch to the “on” position. The subwoofer will automatically turn itself on when it receives an audio signal, and it will go into standby mode after it has received no audio signal for 20 minu...
