JBL Synthesis SDEC-3500 Operation Manual

Other manuals for Synthesis SDEC-3500: Owner's Manual

Summary of Synthesis SDEC-3500

  • Page 1

    Sdec-3500 sdec-4500 sdec-5500 digital equalizer.

  • Page 2

    Important safety instructions warning for your protection read the following: read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. For indoor use only. Do not block any of the ventilation open...

  • Page 3

    Avertissement pour votre sÉcuritÉ lire attentivement : lire ces consignes. Conserver ces consignes. Respecter tous les avertissements. Suivre toutes les consignes. Ne pas utiliser cet appareil prÈs de l’eau. Nettoyer uniquement avec un chiffon sec. Pour usage intÉrieur uniquement. Ne pas obstruer le...

  • Page 4

    - 2 - jbl synthesis sdec-3500/sdec-4500/sdec-5500 table of contents introduction, and installation considerations ................................. 2 controls and indicators – front panel ........................................... 3 rear panel connections ..............................................

  • Page 5

    - 3 - jbl synthesis sdec-3500/sdec-4500/sdec-5500 front panel controls & indicators b input/output card monitoring: each channel has three led indicators showing: clip – indicates clipping in the analog domain for each channel of the fitted input or output card. The led will light at +18.5db. Signal...

  • Page 6

    - 4 - jbl synthesis sdec-3500/sdec-4500/sdec-5500 rear panel connections rear panel connections h power cord socket: connect the power cord here and then connect to a mains output with voltage from 85v to 270v, 50/60hz. I locate: press this button to illuminate the locate button on the front and ide...

  • Page 7

    - 5 - jbl synthesis sdec-3500 input/output assignments input/output assignments sdec-3500 analog connections the sdec-3500 supports up to 7.1 input with up to 7.1 output. The input and output assignments are described in the table below. You must make the correct connections from the surround proces...

  • Page 8

    - 6 - jbl synthesis sdec-4500 input/output assignments sdec-4500 the sdec-4500 is comprised of one sdec-4500p plus either an sdec-4500x or a combination of sda series amplifiers with blu-link digital connection capability. The blu-link digital connection carries all necessary signals on a single cat...

  • Page 9

    - 7 - jbl synthesis sdec-4500 input/output assignments sdec-4500 with bi-amplified front speakers this configuration requires the selection of bi-amplified operation, as noted on page 6. Surround processor to sdec-4500p inputs number channel sdec-4500p 1 left front a1 2 right front a2 3 center front...

  • Page 10

    - 8 - jbl synthesis sdec-4500 input/output assignments sdec-4500 with full-range front speakers this is the default configuration. Surround processor to sdec-4500p inputs number channel sdec-4500p 1 left front a1 2 right front a2 3 center front a3 4 left side a4 5 right side b1 6 left rear b2 7 righ...

  • Page 11

    - 9 - input/output assignments jbl synthesis sdec-5500 sdec-5500 the sdec-5500 can be used by itself with sda amplifiers or in combination with a sdec- 4500x. All of these products utilize the blu-link digital connection that carries all necessary signals on a single cat 5e cable. The correct synthe...

  • Page 12

    - 10 - input/output assignments jbl synthesis sdec-5500 below shows the sdec-5500 connections both standard and configurable when used with the sdp-75-16 sdec 5500 connections sdp-75 -16 ouput connections sdec-5500 inputs sdec-5500 outputs ic cable # sdp 75 output # standard configurable blu-link ch...

  • Page 13

    - 11 - input/output assignments jbl synthesis sdec-5500 below shows the sdec-4500x connections for both factory and alternate settings when used with the sdec-5500 sdec 4500x with sdec 5500 (factory setting) standard ic cable # output connections left front-low / full range 1 a1 left front -hi (n/c ...

  • Page 14

    - 12 - jbl synthesis sdec-4500/sdec-5500 below shows the connections on the second sdec-5500 when used with the sdp-75-32. The changes shown on the first sdec-5500 and sdec-4500x should not be applied without first contacting jbl synthesis technical support. Sdec 5500 sdp-75-32 ouput connections sde...

  • Page 15

    - 13 - jbl synthesis sdec-3500/sdec-4500/sdec-5500 specifications specifications inputs electronically balanced on phoenix/combicon removable screw connectors mic/line inputs: nominal gain 0db, electronically switchable up to +48db, in +6db steps, input impedance 3.5k ohms maximum input level: +20db...

  • Page 16

    Harman international industries, incorporated 8500 balboa boulevard, northridge, ca 91329 usa © 2016 harman international industries, incorporated. All rights reserved. Thisdocumentshouldnotbeconstruedaacommitmentonthepartofharmaninternationalindustries,incorporated.Allfeatures,specificationsandthea...