JBL VRX932LAP Brochure & Specs

Key Features:

Built-in JBL DrivePack

®

DPC-2 amplifier

module designed by Crown provides 1750

Watts of peak power. DSP-based resident

input module provides system optimization

and EQ.

JBL’s exclusive neodymium magnet

Differential Drive

®

woofer for high-power

capacity and light-weight.

VRX932LAP features 3 x 2408J Annular

Ring Diaphragm HF drivers.  The 2408

represents the latest in JBL Professional

compression driver design.

Constant Curvature waveguide for

unprecedented array coherence.

Integral rigging hardware for simple

connection of enclosures and optional

array frame. Dual angle pole socket for

aiming flexibility.

Array Configuration Selector permits “array

shading”.

Application:

Music playback and sound

reinforcement in mid-size venues.

Entertainers, corporate A/V professionals and

sound system hire companies.

Permanent Installation.

The VRX932LAP is a powered, light-

weight, compact 12" two-way line-array

speaker system designed for use in arrays

of up to five units. VRX932LAP is the ideal

choice when line-array performance is

needed but the venue size doesn't call for

the very long-throw characteristics of larger

line-arrays and a fast and easy setup is

vital. 

The Constant Curvature waveguide

mounts three compression drivers on a

continuous arc. When additional

VRX932LAP speakers are added to the

array the uninterrupted arc continues. In

effect, all the drivers work together as if

they were a single driver on a very long

waveguide. Since there are three drivers in

each VRX932LAP, the combined power

handling and acoustic output of the system

is far greater than a single driver could

achieve.   

VRX932LAP uses “amplitude shading” to

shape the coverage of the array. Switches

on the input plate allow, for example, the

upper box in an array to reach a distant

balcony while the lower box is shaded

back to reduce excessive level at the front

of the listening area. This yields to a more

coherent sound field and less feedback

problems.

One or two VRX932LAP’s may also be

used on a tripod or over subwoofers. The

integrated rigging hardware is used to

securely lock the array together while the

dual-angle pole socket provides aiming

flexibility.

As many as five VRX932LAP speaker

systems may be suspended in a single

array for a nominal vertical coverage of up

to 75°. Suspended applications require the

JBL VRX-AF array frame or eye bolts

(available separately). 

The VRX932LAP is compatible with VRX918SP/VRX918S and SRX781S subwoofers.

The VRX932LAP is manufactured and sold under U.S. patents 5,748,760; 6,112,847;

6,394,223;  6,847,726; 6,768,806; 6,774,510; and D483,743 

Specifications:

Frequency Range (-10 dB): 57 Hz - 20 kHz

Frequency Response (±3 dB): 75 Hz - 20 kHz

Coverage Pattern: 100° x 15° nominal

Maximum Peak Output

1

: 136 dB SPL at 1m

LF Driver: 1 x JBL 2262FF 305 mm (12 in) dual voice coil Differential

Drive

®

woofer with neodymium-magnet 

HF Driver: 3 x JBL 2408J, 38 mm (1.5 in) voice coil neodymium

compression driver

Bandpass Nominal Impedance: LF: 2 x 2 ohms

HF: 4 ohms

DPC-2 Internal Amplification 

Output (at nominal load): 1750 Watts Peak, 875 Watts Continuous

DPC-2 Output as (Continuous IEC

shaped pink noise into rated load

impedance): LF: 750 Watts, HF: 125 Watts

DPC-2 Output Section: LF: Dual-Bridged Technology™, Class D

HF: Bridged Class D

Audio Input Connector: XLR with loop through

User Controls: Input Attenuator (0-16 dB)

ACS (Array Configuration Selector), 

HF level adjustment (+3 dB, 0 dB, -3dB)

Signal Processing: DSP based, resident in Input Module

System Management: DSP based limiters for mechanical and thermal protection.

AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz

AC Line Voltage: User selectable: 120V/240V (-15%, +10%)

AC Input Connector: Neutrik PowerCon (NAC 3MPA)

AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)

AC Current Requirements: 6A per system at 120V, 3A per system at 240V

Enclosure: 25/15 mm birch plywood.

Suspension / Mounting: Optional VRX-AF line-array frame kit, 10mm forged eyebolts or

internal dual angle 36mm pole mount cup for pole or tripod

mounting

Finish: Black DuraFlex™ finish

Grille: Powder coated, black, 16-gauge perforated steel with acoustically

transparent foam

Dimensions (H x W x D): 349 mm x 597 mm x 444 mm

(13.75 in x 23.5 in x 17.5 in)

Net Weight: 24 kg (52 lb)

Optional Accessories: VRX-AF array frame, eyebolt kit part #229-00017

SS2-BK tripod speaker stand

SS3-BK satellite speaker pole

SS4-BK adjustable satellite speaker pole to be used with the

VRX918SP and SRX718S only.

1

Measured with IEC shaped noise in free field conditions.

JBL continually engages in research related to product improvement.  Some materials, production methods and design

refinements are introduced into existing products without notice as a routine expression of that philosophy.  For this

reason, any current JBL product may differ in some respect from its published description, but will always equal or

exceed the original design specifications unless otherwise stated.

VRX932LAP

12" Two-Way

Powered Line Array

Loudspeaker System

75015_JBL_VRX932LAP  8/16/07  7:14 AM  Page 1