Jcb 70360 User Manual - Extending Crevice

6

EXTENDING CREvICE 

TOOl 

‚

This is useful for spot cleaning and hard to 

reach places. To extend the crevice tool ‚, pull 

out the extending section. To retract, push the 

button on the side and push the end back into 

the tool body D.

UphOlSTERY NOZZlE 

‡

& BRUSh ATTAChmENT 

·

This is stored on the underside of the tank E.

The upholstery nozzle ‡ is useful for larger 

areas of soft furnishings. Attach the brush · 

for use on hard surfaces F.

DRY vACUUm ClEANING

When picking up fine dust, the filter will clog 

more quickly. Emptying the tank fl and 

cleaning the filter (see Filter section) after every 

use will help maintain full suction.

wET pICK-Up

When picking up liquids, do not fill beyond the 

max fill line.

EmpTYING

To empty, lift the two tank catches Á on either 

side of the motor housing fi and lift off the 

top section of the cleaner from the tank fl G. 

Empty the tank fl. Rinse out any dirt and dry 

fully before re-fitting the motor housing fi.

FIlTER

To maintain maximum suction, the filter must 

be clean. Ideally, the filter should be cleaned 

after every use, especially if fine dust is picked 

up.

To clean, remove the filter from the filter cage 

H by stretching the elastic neck of the filter 

off the filter cage. Wash the filter in cool clean 

water (no detergent). Leave to air-dry before 

refitting.

When refitting, make sure that the filter is 

secured by making sure the elastic neck of the 

filter is located over the circular rib of the filter 

cage.

E

F

G

H

D