Jcb DD12Li Safety And Operating Manual - Technical Data
SO53 3LE
Customer Helpline 0845 600 5526
tECHniCaL Data
Voltage
12V
No load speed
0-350/ 0-1300/min
Number of clutch positions
15+1
Max torque
14/24 N.m(soft/hard)
Chuck capacity
10mm
Max. drilling
capacity
Steel
10mm
Wood
20mm
Machine weight
1.0Kg
nOiSE infORMatiOn
viBRatiOn infORMatiOn
Vibration total values (triax vector sum) determined according to EN 60745:
Drilling into metal
Vibration emission value a
h
=1.24m/s²
Uncertainty K =1.5m/s²
A weighted sound pressure L
pA
: 73dB (A)
A weighted sound power L
wA
: 84dB (A)
K
pA
& K
wA
=3.0dB (A)
Wear ear protection when sound pressure is over: 80dB (A)
waRning: The vibration emission value during actual use of the power tool
can differ from the declared value depending on the ways in which the tool is
used dependant on the following examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
To use the correct accessory for the tool and ensure it is sharp and in good condition.
And the tool is being used as intended by its design and these instructions.
this tool may cause hand-arm vibration syndrome if its use is not adequately
managed.