- DL manuals
- Jcb
- Sander
- JCB-ROS330
- Safety And Operating Manual
Jcb JCB-ROS330 Safety And Operating Manual
Summary of JCB-ROS330
Page 1
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 safety and operating manual random orbital sander jcb-ros330
Page 3: 1. Work Area Safety
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save a...
Page 4
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 a moment of inattention while operating power tools may result in serious personal injury. B) use personal protective equipment. Always wear eye protection. Protective ...
Page 5: 5. Service
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. F) keep cutting tool...
Page 6
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 8. Ensure your mains supply voltage is same as indicated on the rating plate. 9. Your tool is double insulated for additional protection against a possible electrical i...
Page 7: Symbols
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 symbols to reduce the risk of injury, user must read instruction manual wear ear protection wear eye protection wear dust mask double insulation rcm marking.
Page 8: Component List
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 1. On/off switch 2. Hand grip area 3. Variable speed control 4. Cyclonic dust box 5. Dust extraction outlet 6. Latching lever 7. Base plate 8. Sanding sheet (see b) com...
Page 9: Technical Data
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 technical data voltage 230-240v~50hz power input 330w no load speed 6000-12000/min base size 125mm orbital dia 2.5mm protection class /ii machine weight 1.95kg accessor...
Page 10: Intended Use
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 note: before using the tool, read the instruction book carefully. Intended use the machine is intended for dry sanding of wood,plastic, metal and filler material as wel...
Page 11: 2. Cyclonic Dust Box
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 2. Cyclonic dust box (see d) a) attach the cyclonic dust box your sander is equipped with a cyclonic dust box. To attach, slide the box onto the outlet piece and take c...
Page 12: 4. Variable Speed
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 f g h 4. Variable speed control (see f) with the variable speed control (3), the required speed can be selected (also while running). The required speed is dependent on...
Page 13: Rough Sanding
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 rough sanding attach a sand paper with coarse grain. Apply only light sanding pressure to achieve increased material removal. Fine sanding attach a sand paper with fine...
Page 14: Maintenance
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 working hints for your sander if your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run it with no load for 2-3 minutes to...
Page 15: Troubleshooting
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 troubleshooting 1. If your sander will not operate, check the power at the mains plug. 2. If the sander does not abrade surface, checking the sanding paper. If the sand...
Page 16
Positec australia pty limited unit 15, 23 narabang way, belrose 2085 nsw australia www.Jcb-tools.Com customer helpline 1300 889 028 our goods come with guarantees that cannot be excluded under the australian consumer law. You are entitled to a replacement or refund for a major failure and for compen...