Summary of Jupiter 1
Page 1
1 instruction manual jupiter 2 jcmseating.Co.Uk jcmseating.Co.Uk standard deluxe.
Page 2: Contents
2 contents introduction 3 measurements & useful info 4 seating system components 5/6 important safety advice 7 important safety advice - general guidance for use 8 important safety advice - accessories 9 important - chest harness adjustment 10 important - lap strap safety 11 lap strap fixing points ...
Page 3: Introduction
3 introduction introduction 3 measurements & useful info 4 seating system components 5/6 important safety advice 7 important safety advice - general guidance for use 8 important safety advice - accessories 9 important - chest harness adjustment 10 important - lap strap safety 11 lap strap fixing poi...
Page 4: Measurements & Useful Info
4 measurements & useful info jupiter size 1 size 2 standard size 2 deluxe size 3 number of sizes 1 1 1 1 age range 3yrs - 9yrs 8yrs-13yrs 8yrs-13yrs 12yrs-adult chassis footprint width 570 660 740 730 overall footprint length 510 710 800 730 min max min max min max min max overall height 1070 1265 1...
Page 5: Seating System Components
5 seating system components (deluxe) a push handle b headrest c shoulder protraction pads d lateral supports e hip pads f contoured seat g footrest h castors i adjustable arm rest - deluxe a d e f g i b c h.
Page 6: Seating System Components
6 a push handle b headrest c shoulder protraction pads d lateral supports e hip pads f contoured seat g footrest h castors i adjustable arm rest - std a e f g b c h i d seating system components (standard).
Page 7: Important Safety Advice
7 important safety advice we at jcm are committed to producing products of the highest standard. All of our products fulfil the essential safety and environmental requirements as defined in the european directives. However, improper use of the products will potentially put the users at risk and ther...
Page 8: Important Safety Advice
8 all jcm seating systems should only be size adjusted by qualified professionals or suitably trained individuals. • the jupiter seating system is intended to be used on a level flat floor only • the jupiter seating system can be moved from one working area to another but before moving: - the seat b...
Page 9: Important Safety Advice
9 important safety advice (accessories) multi adjustable head support wings on the head support are ideally set at 45 degrees. Do not bring the wings in tight to the head. Ensure that the head support is set in such a way that the child cannot loop their head around the wings and get stuck. Flexi-su...
Page 10: Important - Chest
10 important - chest harness adjustment great care should be taken when fitting a chest harness and the following points should always be followed: • the straps on the harness should never be allowed to move close to or in any way cause an obstruction to the child’s neck. • the straps should never b...
Page 11: Important
11 important lap strap safety incorrect fitting of lap straps can put the user at serious risk. When using lap straps we recommend the following points should always be adhered to: lap strap fitting • the angle that the hip belt is attached to the seating system has a direct effect on the angle of p...
Page 12: Lap Strap Fixing Points
12 lap strap fixing points harness and lap strap positioning this diagram shows the recommended positioning of the chest harness and lap straps: ensure all belt straps are secured over the lock bar (c) and clamp is closed down in its locked position (b) & (a). All straps & harnesses must be securely...
Page 13: Adjustment Tilt / Prone
13 adjustment tilt / prone push handle adjustment the chair has been designed to offer a substantial variation of positioning and support, which the tilt / prone angle and back recline mechanism can help to demonstrate. The chair can be positioned at any point within this range to suit any situation...
Page 14: Chair Height Adjustment
14 chair height adjustment the height of the chair can be adjusted by removing pin (a) from the chair leg and pulling the castor away from the frame. This will reveal extra holes in the chrome work (b), which enable the chair to sit at different heights. When a suitable height has been achieved re-a...
Page 15: Head Rest Adjustment /
15 head rest adjustment / replacement head rest height / replacement • turning hand wheel (a) anti-clockwise enables you to adjust the height of the head rest by moving it up or down. Re-tighten the hand wheel to secure into place. Head rest forward / rearward & angle adjustment. • turn levers (b) a...
Page 16: Arm Rest Adjustment
16 arm rest adjustment arm rest width adjustment - deluxe model only. • un-tighten bolts (b) adjust the arm by either: pulling it outwards, away from the seat frame to expand the seat width or pushing it inwards towards the frame to narrow the seat width. • once a suitable position has been achieved...
Page 17: Shoulder Protraction Pad
17 • turning both levers (a) anti-clockwise releases the lock and allows height adjust of the back rest. Lift up to increase the height or push down to lower the height. • the height of the back should be adjusted to fit the size of child and seat them in comfort. • once a suitable position has been...
Page 18: Lateral Support Adjustment
18 lateral support width & height • using the 4mm allen key t bar supplied, turn bolts (a) 1/2 a turn anti-clockwise to release the lateral support. • move the lateral support in, out, up or down until the required position has been achieved. • once the required position has been achieved, turn bolt...
Page 19: Horizontal Positioning
19 horizontal positioning • turn lever (a) anti-clockwise to adjust the height positioning of the pommel. (the pommel can be completely removed from the frame using this method and then re-inserted once the child is seated.) • turn the lever clockwise to fix the pommel securely into place. Vertical ...
Page 20: Footplate Angle
20 vertical position of footplate • turn levers (a) anti-clockwise to adjust the vertical position. • extended the footplate to suit the child and provide suitable support and comfort. • re-tighten the levers to secure into place. Footplate angle • the footplate can be flipped out of the way by push...
Page 21: Seat Depth Adjustment
21 • turn bolts (a) anti-clockwise with the 5mm t bar allen key provided. • move the backrest forward or backwards until the required seat depth has been achieved. • turn bolts (a) clockwise to tighten, ensure the bolts are secure and tight. Seat depth adjustment a • located on the lower horizontal ...
Page 22: Cleaning & Care
22 we recommend the following points for successful cleaning of your equipment. (it is possible that some surface wrinkling may occur following these processes) fabric upholstery care refer to jcms fabric cleaning guide which can be found on their website www.Jcmseating.Co.Uk do not use bleach, acid...
Page 23: Servicing Via Approved
23 castors lift base and check each wheel to ensure it is not damaged, loose or worn. Brakes • removing any grease or dirt that has built up on the wheels, check that the brakes stop the wheels rotating. • check they are securely fixed in place & that there are no signs of damage or wear & tear. Pus...
Page 24: Service Record Log
24 this log is an important record of usage and care of the product. It is a primary tool in predicting the need for further service and maintenance. It should be completed each time an inspection, service or any other significant manipulation has taken place. Jcm seating solutions ltd. Will require...
Page 25: What It Covers
25 products manufactured by jcm are covered with a manufacturer’s 3 year warranty. What it covers the warranty covers all aspects of product failure due to faulty workmanship or manufacturing. Period of cover the period of the warranty runs for 3 years from the date that the product is dispatched. T...
Page 26: Cleaning
26 inspecting & reissuing of equipment most jcm seating solutions ltd. Products are individually assessed for a client prior to issue. They are handed over in a controlled way to ensure optimum fit and specification, checks are completed and any additional individual verbal instructions given. We th...
Page 27: Accessories
27 accessories check all accessories carefully for damage and potential shortcomings which may pose a risk to the user. Function ensure that all the functions of the chair are working correctly e.G. Tilt in space, height adjustment, back recline, folding etc. Fixings check that any knobs, hand wheel...
Page 28: Www.Jcmseating.Co.Uk
Q.A.90 (march 2016) © 2016 jcm seating all rights reserved. Www.Jcmseating.Co.Uk.