JDS Uniphase HST-3000 Product Manual - page 3
The HST-3000 is an All-in-One Tester
The HST-3000 is a modular platform that covers a broad range of interfaces and
services.
T1 and DS3
– Allows for monitoring, terminating, and drop and insert testing;
standard and advanced BERT patterns; T1/DS3 and HDSL loopcodes; and PCM
TIMS and signaling.
Frame Relay
– Tests Frame Relay service over Datacom, T1, and DDS-LL links.
BRI
– Places and receives voice and data calls using the two B channels on S/T and
U interfaces.
PRI
– Places and receives calls using all 23 B channels. Also supports NFAS and
D-channel back up.
DDS
– Supports 4-wire local loop and T1 DDS support, BERT, loopcodes, and
CSU/DSU emulation.
Copper qualification
– Supports DVOM, TDR, Wideband Tones, RFL, Spectral
Analysis, Analog Loss and Noise, POTS Dialer, and Load Coil Counter.
Ethernet
– Verifies Ethernet connectivity with receiver (RX) and transmitter (TX)
bytes, frames, and errors. Also supports ping and tracerouting.
VoIP
– Places and receives VoIP calls. Also verifies connectivity and quality of
service (QoS).
ADSL
– Verifies ISP and Internet connectivity. Supports ATU-R/C Emulation.
G.SHDSL
– Supports installation and verification of G.SHDSL circuits with STU-
R/C emulation.
Saved Results
The HST-3000 can save hundreds of results that can then be exported directly to
a printer or to a PC via serial or Ethernet ports, which can then be e-mailed,
printed, or saved onto a PC. The HST-3000 file manager also allows technicians
to view previously saved test information directly on the instrument.
VT100 Emulation
With the HST-3000 VT100 emulation feature, technicians can access T1 and
HDSL network equipment for configuration, performance data measurements,
and loopback capabilities without having to carry a PC or laptop into the field.
Flexible and Rugged Design
The rugged, weather-resistant design and long battery life of the HST-3000 are
ideally suited for use in the field. Standard Ethernet, USB, and serial ports offer
flexibility for easily downloading software and offloading captured test data.
Easily configurable, technicians with differing responsibilities can use the
HST-3000 to perform a wide variety of tests. The HST-3000 is based on a modular
platform, allowing for the addition of upgrades and options in the field. This
flexibility also allows for the support of future growth in new tech-nologies and
advanced options to accommodate the changing needs of versatile technicians.
3
HST-3000 OPTION FOR DATACOM TESTING