JDTECK JDIR-37-87 Technical User's Manual - page 7
Manual is about: Band Selective Industrial Repeater
of
11
3.3 Installation Procedure
– Repeater Mounting.
The JDIR series repeater can be mounted on a wall or pole. First remove
bracket from repeater and securely bolt bracket to the wall. Be sure to use a
level so the bracket is straight when completed.
Once the bracket is secured to the wall, then slide repeater onto the bracket.
Example of repeaters installed in communications closet.
3.4 Installation Procedure
– Repeater Mounting Cont.
For the pole mount option, remove the bolts for the 2 lateral cross bars and
turn them 90 degrees so the notches face to the rear. Then reattach the bars
using the same bolts.
Once the bracket is secured to the wall, then slide repeater onto the bracket.
11
12