Jeanneau 53 Owner's Manual - page 33
129/154
119635
Index G
3. Operation
- Turn on all battery switches. The bow thruster battery master switches will
turn on automatically when the bow thruster control is picked up.
- Open the fuel supply valve(s) from the fuel tank(s).
- Open the engine water inlet valve.
- Switch on the navigation electronics (Electrical panel).
- According to the auto pilot model and screen model, it may be necessary to touch the
POWER button on the screen at the helm station to activate the auto pilot in
"MOTORISED HELM" mode or POWER
- Check that the engine control lever is in neutral.
- Switch on the engine.
- Start the engine.
- Activate the bow thruster manually using the control push button. A steady light
illuminates on the bow thruster control panel: The system is operating.
- Press the joystick button and hold down for 2 seconds before activating the joystick
(When the button is released, the 2 LEDs on the joystick will change to steady green).
4.
Joystick operation
- REMINDER: Before using the system, ensure that the bow thruster light is illuminated
(see above) once the boat's engine is startedCheck that the bow thruster indicator light
is showing steady green when the joystick is in operation.
DANGER
If you activate the joystick while the rudder blade is not in the same position
as the boat's axis, it will automatically move itself to the correct position.
WARNING
The wheel will spin quickly and may catch your arm, clothes, hands as it
does so: keep away from the wheel when the system is running.
10
E
N
G
IN
E