Jeanneau CAP CAMARAT 925 WA Owner's Manual - page 51
47/82
084807
Index H
DRAINAGE SYSTEM
Waste water from the heads is drained off by a thru-hull fitting with ball valve (the valve is
closed when the valve handle is perpendicular to the hose, the valve is open when the
valve handle is in line with the hose).
MAINTENANCE
RECOMMENDATION
- Regularly check the valves and thru-hull seacocks for proper operation and
watertightness.
- Turn off the valves when the water system is not in use.
- Visually check the water pump flow.
- Check the clamps and flexible hose connections for tightness.
- Pay attention to the seals for condition.
- Regularly make sure that the strum box and bilge are perfectly clean.
- Immediately switch off the electric system in case a pump is running while all the
water supplies are turned off.
- In case of a leak check the system.
WARNING
The bilge pump system is not designed to provide buoyancy to the boat in case of
damage.
The bilge pump system is designed to drive out the water being either sea spray or leaks
but absolutely not the water coming through a hole in the hull, this hole being the result
of a damage.
6
P
L
U
M
B
IN
G