Jeanneau MERRY FISHER 605 Owner's Manual - page 11
- 11 -
993256
Index A
1 TECHNICAL SPECIFICATIONS
1.1 CONSTRUCTION
Model ........................................................................................................MERRY FISHER 605
Architect / Interior design .............................................................. Centkowski & Denert Design
Builder .........................................................................................................................SPBI S.A
Principal means of propulsion ...........................................................................................Motor
Deck construction material ....................................Laminated sandwich glass / Polyester / Sinter & Foam
Hull construction material ...................................... Single skin laminated fibreglass / Polyester
Application ............................................................................................................. Wet laid fibre
1.2 GENERAL DIMENSIONS
L.O.A - without engine (L
max
)* ......................................................................................... 5,79 m
(Including removable parts that can be dismantled without affecting the boat's structure(bow roller, pulpit,
platform))
Hull length (L
h
)* ............................................................................................................... 5,51 m
(Excluding: removable parts that can be dismantled, without affecting the structure of the boat)
Overall width (B
max
)*........................................................................................................ 2,46 m
(Including: removable parts that can be dismantled, without affecting the structure of the boat)
Beam(B
h
)*........................................................................................................................2,40 m
(Excluding: removable parts that can be dismantled, without affecting the structure of the boat)
Air draught – Empty vessel.............................................................................................. 2,50 m
Draught - Boat fully laden - without engine...................................................................... 0,43 m
Wetted surface area .................................................................................. Approximately 11 m²
1.3 ENGINE
Nominal maximum propulsion power ............................................................................... 85 Kw
Maximum recommended engine size .............................................................................. 220 kg
1.4 ELECTRICITY
Circuit type - Direct current .................................................................................................. 12V
Circuit type - AC ................................................................................................................ 220V
1.5 CAPACITIES
Total mass of the liquid content of fixed tanks when they are full ..................................... 95 kg
Fuel capacity ...................................................................................................................... 100 l
Fresh water capacity ............................................................................................................ 20 l
It may not be possible to use these capacities fully depending on the trim and load of the boat.
It is recommended to keep a reserve of 20% in the fuel tanks.
1
TECHNICAL
SPECIFICATIONS